HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
JimT@Future-Product-Innovations
User Rank
Blogger
Hard Lesson Leaarned
JimT@Future-Product-Innovations   5/9/2013 6:36:05 PM
NO RATINGS
Looking back over archived stories, I had missed this one, now over a month old. I have several past product experiences using various conductive adhesives, and I had learned a very valuable lesson a few years ago. 

Without going into specifics, I can tell you I had designed myself into a corner, and needed to get an electrical component connected to the main circuit. Based on its unique mounting condition, a conductive adhesive was the obvious answer.  I simply plowed forward with the mounting method and the adhesive, and had first parts prototyped.

 When the component didn't function properly, I learned the current required for the component far exceeded the current capability of the conductive particles in the adhesive.  There was no way the adhesive as ever going to drive the component properly, and I was stuck.

This bad assumption kicked me back significantly, and I had to undergo a substantial redesign.  That's one lesson I'll never forget.

William K.
User Rank
Platinum
Re: Electrically conductive adhesives.
William K.   4/29/2013 10:11:57 PM
NO RATINGS
I do see a serious potential for use with surface mount components, particularly the very small ones with sizes under one mm. Those parts are a big challenge to work with by hand, which makes prototyping quite a challenge. A conductive adhesive could provide some help.

notarboca
User Rank
Gold
Re: Electrically conductive adhesives.
notarboca   4/29/2013 9:32:40 PM
NO RATINGS
This should be quite handy in electrically connecting components in situations too tight for a wire or traditional connector.

Greg M. Jung
User Rank
Platinum
Chemical Resistance
Greg M. Jung   4/11/2013 9:47:03 PM
NO RATINGS
Well researched article. I am assuming that the silicone in the adhesive can also help increase inadvertent exposure to chemicals and possibly have good chemical resistance.

William K.
User Rank
Platinum
Electrically conductive adhesives.
William K.   4/9/2013 11:29:36 AM
NO RATINGS
It is clear that stable electrically conductive adhesives can be of great value in quite a few applications. So the usefulness potential is quite high.

Mant years ago I had an experience with anelectrically conductive adhesive material that I used to assemble a switch. The problem was that I did not realize that the material was conductive at all. The result was that while the assembly was fine mechanically, the switch was always "on", which caused me quite a bit of puzzelment, since it was clear that the contacts were opening as desired. The end result was that I had to use a different switch and a mechanical means of attachment. But it was certainly an educational experience.



Partner Zone
Latest Analysis
No, we're not having delusions of grandeur -- this is the weapon of a Jedi Knight. And we're dying to see how it works. Today, we tear down a lightsaber.
There is currently much discussion around the term "platform," which may be preceded by the adjectives "mobile," "wearable," "medical," "healthcare," etc. However, regardless of the platform being discussed, they usually have one key aspect in common: They tend to be wireless. So, why is this one aspect so fairly universal? The answer is convenience.
Everyone has a MEMS story. For most of us it’s probably the airbag that saved our lives or the life of a loved one. Perhaps it’s the tire pressure sensor that alerted us about deflation before we were stranded alone on a dark muddy road.
Bioimimicry is not merely a helpful design tool -- it also encourages designers to think not only about how to solve design problems by imitating nature, but how to make the products, materials, and systems they design more ecologically sound and nature-friendly.
Fully adopting multiphysics simulation software enables companies to optimize cable and systems designs for a wide range of harsh environments.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 4 - 8, Designing Low Power Systems using Battery and Energy Harvesting Energy Sources
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service