HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 2/2
William K.
User Rank
Platinum
Robots added to 3D printing systems
William K.   3/13/2013 9:30:07 AM
NO RATINGS
The addition of robots to a 3D printing system is a logical progression, but the economics depend on how many objects are to be produced, or on how much labor is to be saved per object. While robots are indeed wonderful pieces of automation, thier primary benefit comes from repeating the same task many times. Producing a correct robot program is not a trivial task, it requires time, effort, and expertise. So it is much more likely that the robots would be a great help im mass production of things rather than single units. 

There is probably no reason why appropriately sized standard industrial robots would not be able to work with the 3D printer to do everything described in the article. I know that MOTOMAN has been producing a suitable robot for at least ten years. I am sure that other robot makers have also been producing them as well. And linking the robot to the printer should be no harder than linking a robot used to load and unload a forging press.

Elizabeth M
User Rank
Blogger
Re: Evolution
Elizabeth M   3/13/2013 5:50:02 AM
NO RATINGS
Indeed, Chuck, but iRobot seems to have gotten there first, at least in announcing heir plans. It fits into their successful consumer robotics strategy, too, as 3D printers are not merely a business product and as they become less expensive, they will find their way into more homes (perhaps beside a Roomba :)).

Charles Murray
User Rank
Blogger
Re: Evolution
Charles Murray   3/12/2013 8:12:04 PM
NO RATINGS
I agree, Liz. It's the next obvious evolutionary step for 3D printing. And it's not surprising  that it comes from iRobot. I'll bet there are a lot of robotics designers who are hitting themselves in the head for not thinking of this first.

Elizabeth M
User Rank
Blogger
Re: Evolution
Elizabeth M   3/12/2013 4:21:05 PM
NO RATINGS
Interesting, Ann, but that makes great sense as well--combining 3D printing with assembly (though I was imagining more of a standard automation-type assembly system than the underwater one described in your story). Quite amazing to think of the possibilities of all of this--a completely automated 3D printing and assembly process. Seems not so far off! But what happens to the human workers?

Ann R. Thryft
User Rank
Blogger
Re: Evolution
Ann R. Thryft   3/12/2013 1:41:57 PM
NO RATINGS
I agree with Elizabeth--this is a logical next step. But so is another way of achieving a similar automated end: combining 3D printing with self-assembly: http://www.designnews.com/author.asp?section_id=1392&doc_id=26011

It will be interesting to see if either of these approaches actually materializes and, if so, which one happens first.

Elizabeth M
User Rank
Blogger
Evolution
Elizabeth M   3/12/2013 9:01:35 AM
NO RATINGS
Well this of course is the likely evolution of 3D printing, as it seems like robotics and automation are becoming a part of so many human-driven processes these days. So the tables will turn, in a sense; 3D printing has been used to fabricate a robot and soon a robot will do your 3D printing for you. :) http://www.designnews.com/author.asp?section_id=1386&doc_id=258309

<<  <  Page 2/2


Partner Zone
Latest Analysis
Former DARPA official and Google executive Dr. Kaigham Gabriel believes sensor companies think too much like suppliers and need to bring their products closer to the consumer.
One way to keep a Formula One racing team moving at breakneck speed in the pit and at the test facility is to bring CAD drawings of the racing vehicleís parts down to the test facility and even out to the track.
Most of us would just as soon step on a cockroach rather than study it, but thatís just what researchers at UC Berkeley did in the pursuit of building small, nimble robots suitable for disaster-recovery and search-and-rescue missions.
Engineers at Festo were inspired by how a caterpillar builds its cocoon when designing its new 3D Cocooner printer.
Design engineers need to prepare for a future in which their electronic products will use not just one or two, but possibly many user interfaces that involve touch, vision, gestures, and even eye movements.
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course June 28-30:
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service