Jack Rupert, PE
User Rank
Re: Efficiency & technology questions
Jack Rupert, PE   3/25/2013 3:52:20 PM
Taking Chuck's question one step further, besides the additional applications, what are the realistic distances that can be expected in the near future before the costs get prohbitive?

William K.
User Rank
So what is the actual efficiency of wireless charging?
William K.   3/11/2013 3:13:14 PM
At least this article did define the expression for the system efficiency of the charging system, even if it did not give any numbers. I am sure that if the actual efficiency were stated that the whole concept would lose a whole lot of support. Ff course, it is a "really neat gimmick", there is no question about that, but the amount of wasted power plus the large magnetic fields should really be considered as part of the package. But thye promotors are quite aware of those numbers, which is why they are not typically displayed.

User Rank
apresher   3/11/2013 11:30:54 AM
Interesting technology that is definitely important going forward.  Thought some would like this link to an explanation of WiTricity technology.


Charles Murray
User Rank
Re: Efficiency & technology questions
Charles Murray   3/8/2013 6:51:23 PM
I agree with eafpres: It is indeed an important article for our readership. Aside from cell phones, Tahar, can you tell us some of the biggest applications for this technology going forward? Coincidently, Design News has an article coming up involving wireless chaging of a piece of sports equipment, which also involves TI.  

Cabe Atwell
User Rank
Re: Wireless charging
Cabe Atwell   3/8/2013 5:03:40 PM
I'm with Eafpres on the magnetic resonance coupling. Distance is not as big of an issue. TI should get on it. (see "witricity" for more)

When I first used wireless charging with the old Palm webOS phones, I loved it. I know that the charging base (Tx) is still tether to the wall, and you place the device (Rx) on it and so the device is still tetherd, I liked the idea of setting it down freely. It is silly to use a transformer coupler like this for using a device in bed/leasure. I would still use a plug. Any other time...it's the way to go.

My HP (webOS) Touchpad wirelessly charges to my left, right now.


User Rank
Wireless charging
warren@fourward.com   3/8/2013 11:03:29 AM
If we could just focus low frequency energy as we do microwaves we could increase efficiency.  So the answer may be in higher frequencies, but that also causes problems.  And a dish large enough to handle 60 Hz would not fit in most cities, and thus be a bit impractical.  But, it may be inefficient the way it is now, and surely can be improved, but hey, it works!  And it sure is convenient!.

User Rank
Efficiency & technology questions
eafpres   3/8/2013 10:25:52 AM
Hi Tahar--nice article, it seems to me that TI is really leading the world in integrated solutions for all kinds of front ends, energy harvesting, low power, and wireless applications, to name a few.

I was interested in the last part of your note; I have the impression the integrated IC you note saves board space, design time, and cost, but probably does not improve electrical efficiency.  Can you clarify that?

Also, I have heard a little bit about various competing wireless charging standards; in particular I heard about a magnetic resonance technique, which I suppose is different in the mechanism of power transfer. Is TI working on any solutions for this or other wireless charging approaches?

Partner Zone
Latest Analysis
According to a Randstad Engineering compilation of salary studies, engineering salaries are increasing beyond inflation, with employers paying to keep potential suitors away from their employees.
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Check out these gifts that will make you the hero of your Secret Santa party.
Design News Webinar Series
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/29/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
12/2/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service