Al, I think you nailed it: our expectations of industrial robots are quite different from what this one doers. Which is, of course, the whole point. Regarding how big its niche will be, it's potentially pretty broad once the SDK comes out. Time will tell.
Thanks, William. Baxter has eliminated pinch points, as Foellmer demonstrated at the show, and it's also a lot slower than typical high-speed industrial 'bots. Too bad about the saw flesh-detector.
Thanks Ann. I guess their niche is just that -- simple to program applications that can leverage their safety technology. Maybe the problem is that I am programmed that in most pick and place applications, speed is extremely important. And the new Delta style robots are more flexible and less costly than robots with traditional articulated arms. Still makes me wonder how big a niche Baxter might find.
Al, as we said this is an industrial robot for doing simple, repetitive tasks, not highly precise, that humans previously did, such as the simple pick and place shown in the video. The point is that it's not highly specialized and can be easily programmed with open source software for whatever you need, within certain limits.
eafpres, it's pretty simple. if something larger than a part--like the human body--gets inside its working zone, it stops. This is determined by its sensors. Also, if you bump into it faster than it can respond, it won't hurt you because of its softer surface (plastic) and its considerably lower force, compared to other industrial 'bots. More details are available on the website.
Thanks Clinton. I did not think of Baxter wielding the bone rasp--I take no responsibility for others' imaginations! OTOH, Chuck, pointed out that it looks something like a medieval weapon, so I can understand the association. That's an interesting idea about flesh-sensors; I didn't know about that. Sounds like a good cross-app possibility. Hope Rethink is reading these comments...
Ann, Did they mention any specific commercial applications for Baxter? There is certainly interesting technology here but I'm not certain of its application niche.
Interesting use of safety technology. From their website, Baxter contains sensors and software protocols that detect people within contact distance and trigger the robot to slow to safe operation speeds. May be that the robot sets up programmable safety zones on sensor inputs. Every motor can also be "back driven" in order to comply when unexpectedly pushed backwards.
@CLMcDade , That "skin detector" used in the sawstop system would not help in a robot system because it uses a resistance principle, not a touch principle. And the reason that the saw companies are not rushing to adopt this system is that it has a few very big shortcomings, including a very expensive reset process and a propensity toward false triggers from wet wood and nails.
The two steps to make a robot safe for humans to be around is to slow it down to human speeds, and to eliminate pinch-points. By no means a trivial task, but certainly an achieveable target.
But the real point is that 3D printers can make complex shapes that would be too costly (translated: impossible) by other methods. I can imagine that bone cells would really gather 'round this object and build new bone. Additive technology will help us build shapes previously unattainable.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
