As the article states, the new material is not made of polyester fiberglass--it replaces polyester. The new material is a glass fiber composite made with pure polyurethane, which, as stated, can last up to 50. It replaces other materials, including polyester, which degrade faster.
I am surprised that they are looking at improving a poor solution using similar materials. Shouldn't we be looking at different materials that do not have inherent water damage issues? Maybe we should look at carbon componsite or carbon fiber materials. Certainly should be materials that don't degrade from water or UV.
Polyester fiberglass material is not as waterproof as we would like, THAT is the problem. What happens is that the water does flow up around the glass fibers and something does happen causing the material to break down, losing a lot of strength and eventually falling apart. Probably the higher quality stuff takes longer to fail than the poor quality stuff. The gel-coat does definitely delay the beginning of the capilary invasion of the water, so the gel coat is quite valuable in that aspect. So it may be that the actual polyester material is waterproof, but the fiberglass material that it is part of does fail from water absorbtion. So the accusation of lying is a bit to strong. I would say that the crime would be simplification, and making assertions based on seeing evidence that is quite complex to understand.
Thanks, Elizabeth. I was impressed by these guys and what they're trying to do. Sure it's a commercial effort. But it's also good to see such an effort targeted in the right direction.
Agree, I found this really fascinating and it's good to see materials designers trying to come up with a new way to reinforce these important protections against big sea swells. Se walls will be particularly important if climate-change predictions come to bear and storms like Sandy become more frequent, as some think they will. But just n general to bolster the materials used in sea walls seems like a timely and worthwhile thing to do.
While this sounds like a great product, the sourcesare not truthful.
Polyster is waterproof which is proven by the fact gelcoat is polyster resin as the same person also states. Water gets in layups by traveling up the glass fibers by capillary action when the fiber end is exposed to water, etc. If as he says the fiber fill is 75-80% which I seriously doubt, there are many more fibers to suck up water, etc in his resin version.
Next the 75-80% fill isn't a resin fuction but a mechanical one. resin fill depend on how much space is between fibers, not which resin as long as it's thin enough.
Sadly this looks like a good product that doesn't need such lies they are offering. It makes me wonder if one can believe anything they say.
Nice article, Ann. I presume this material would replace corrugated metal. Any idea how it would compare to corrugated metal sheet piles in terms of cost?
Thanks, Nadine. The company works with a third-party company for actual installations. So far, the only US site mentioned for the new material is the Montaulk boat launch in Montaulk, NY.
This is very necessary! Are any other cities, such as Miami or Vancouver, looking at this yet? I'd love to see an update from New York, especially, if it's implemented.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
