As the article states, the new material is not made of polyester fiberglass--it replaces polyester. The new material is a glass fiber composite made with pure polyurethane, which, as stated, can last up to 50. It replaces other materials, including polyester, which degrade faster.
I am surprised that they are looking at improving a poor solution using similar materials. Shouldn't we be looking at different materials that do not have inherent water damage issues? Maybe we should look at carbon componsite or carbon fiber materials. Certainly should be materials that don't degrade from water or UV.
Polyester fiberglass material is not as waterproof as we would like, THAT is the problem. What happens is that the water does flow up around the glass fibers and something does happen causing the material to break down, losing a lot of strength and eventually falling apart. Probably the higher quality stuff takes longer to fail than the poor quality stuff. The gel-coat does definitely delay the beginning of the capilary invasion of the water, so the gel coat is quite valuable in that aspect. So it may be that the actual polyester material is waterproof, but the fiberglass material that it is part of does fail from water absorbtion. So the accusation of lying is a bit to strong. I would say that the crime would be simplification, and making assertions based on seeing evidence that is quite complex to understand.
Agree, I found this really fascinating and it's good to see materials designers trying to come up with a new way to reinforce these important protections against big sea swells. Se walls will be particularly important if climate-change predictions come to bear and storms like Sandy become more frequent, as some think they will. But just n general to bolster the materials used in sea walls seems like a timely and worthwhile thing to do.
While this sounds like a great product, the sourcesare not truthful.
Polyster is waterproof which is proven by the fact gelcoat is polyster resin as the same person also states. Water gets in layups by traveling up the glass fibers by capillary action when the fiber end is exposed to water, etc. If as he says the fiber fill is 75-80% which I seriously doubt, there are many more fibers to suck up water, etc in his resin version.
Next the 75-80% fill isn't a resin fuction but a mechanical one. resin fill depend on how much space is between fibers, not which resin as long as it's thin enough.
Sadly this looks like a good product that doesn't need such lies they are offering. It makes me wonder if one can believe anything they say.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.