HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Ann R. Thryft
User Rank
Blogger
Re: Not good enough
Ann R. Thryft   2/22/2013 4:50:37 PM
NO RATINGS
As the article states, the new material is not made of polyester fiberglass--it replaces polyester. The new material is a glass fiber composite made with pure polyurethane, which, as stated, can last up to 50. It replaces other materials, including polyester, which degrade faster.

akwaman
User Rank
Gold
Not good enough
akwaman   2/21/2013 8:29:18 AM
NO RATINGS
I am surprised that they are looking at improving a poor solution using similar materials.  Shouldn't we be looking at different materials that do not have inherent water damage issues? Maybe we should look at carbon componsite or carbon fiber materials.  Certainly should be materials that don't degrade from water or UV.

William K.
User Rank
Platinum
Re: Great article
William K.   2/20/2013 9:16:11 PM
NO RATINGS
Polyester fiberglass material is not as waterproof as we would like, THAT is the problem. What happens is that the water does flow up around the glass fibers and something does happen causing the material to break down, losing a lot of strength and eventually falling apart. Probably the higher quality stuff takes longer to fail than the poor quality stuff. The gel-coat does definitely delay the beginning of the capilary invasion of the water, so the gel coat is quite valuable in that aspect. So it may be that the actual polyester material is waterproof, but the fiberglass material that it is part of does fail from water absorbtion. So the accusation of lying is a bit to strong. I would say that the crime would be simplification, and making assertions based on seeing evidence that is quite complex to understand.

Ann R. Thryft
User Rank
Blogger
Re: Great article
Ann R. Thryft   2/20/2013 1:04:00 PM
NO RATINGS
Chuck, I asked for but didn't get comparative pricing info. That can be hard to come up with in a vacuum anyway.

Ann R. Thryft
User Rank
Blogger
Re: Great article
Ann R. Thryft   2/20/2013 1:01:37 PM
NO RATINGS
Thanks, Elizabeth. I was impressed by these guys and what they're trying to do. Sure it's a commercial effort. But it's also good to see such an effort targeted in the right direction.

Elizabeth M
User Rank
Blogger
Re: Great article
Elizabeth M   2/20/2013 11:47:40 AM
NO RATINGS
Agree, I found this really fascinating and it's good to see materials designers trying to come up with a new way to reinforce these important protections against big sea swells. Se walls will be particularly important if climate-change predictions come to bear and storms like Sandy become more frequent, as some think they will. But just n general to bolster the materials used in sea walls seems like a timely and worthwhile thing to do.

Jerry dycus
User Rank
Gold
Re: Great article
Jerry dycus   2/20/2013 10:00:41 AM
NO RATINGS
 

  While this sounds like a great product, the sourcesare not truthful.

 

Polyster is waterproof which is proven by the fact gelcoat is polyster resin as the same person also states. Water gets in layups by traveling up the glass  fibers by capillary action when the fiber end is exposed to water, etc. If as he says the fiber fill is 75-80% which I seriously doubt, there are many more fibers to suck up water, etc in his resin version.

Next the 75-80% fill isn't a resin fuction but a mechanical one. resin fill depend on how much space is between fibers, not which resin as long as it's thin enough.

Sadly this looks like a good product that doesn't need such lies they are offering. It makes me wonder if one can believe anything they say.

 

Charles Murray
User Rank
Blogger
Re: Great article
Charles Murray   2/19/2013 7:55:26 PM
NO RATINGS
Nice article, Ann. I presume this material would replace corrugated metal. Any idea how it would compare to corrugated metal sheet piles in terms of cost?

Ann R. Thryft
User Rank
Blogger
Re: Great article
Ann R. Thryft   2/19/2013 4:22:55 PM
NO RATINGS
Thanks, Nadine. The company works with a third-party company for actual installations. So far, the only US site mentioned for the new material is the Montaulk boat launch in Montaulk, NY.

NadineJ
User Rank
Platinum
Great article
NadineJ   2/19/2013 4:13:31 PM
NO RATINGS
Very nice and timely article.  Thanks Ann.

This is very necessary!  Are any other cities, such as Miami or Vancouver, looking at this yet?  I'd love to see an update from New York, especially, if it's implemented.



Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service