HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
apresher
User Rank
Blogger
Electronic Medical Design
apresher   3/5/2013 9:19:40 AM
NO RATINGS
Chuck, It will be interesting to the cost for some of these devices. Disposable versus refurbishing always seems good to me.  But unless the unit cost can really be reduced by greater production quantities, the problem becomes the yearly cost of this kind of device. Thanks for the article.

Charles Murray
User Rank
Blogger
Re: Innovative Medical Design
Charles Murray   3/4/2013 8:13:46 PM
NO RATINGS
Yes, Al, disposability is important. Today's Holter monitors, for example, are not disposable and require refurbishing after every use. The refurbishing can be costly. So if electronics manfacturers can make low-cost systems that can be disposed of, and therefore don't require refurbishing, the uptake of the technology will be greater.

Mydesign
User Rank
Platinum
Re: Embedding chips in body
Mydesign   2/25/2013 11:37:17 PM
NO RATINGS
1 saves
Mrdon, thanks for the details and link. There is no doubt that within a couple of years, wearable devices becomes common especially in connection with medical/healthcare domain.

mrdon
User Rank
Gold
Re: Embedding chips in body
mrdon   2/20/2013 1:28:41 PM
NO RATINGS
Mydesign, MIT has a research group called Little Devices. Their mission statement is: 

"The Little Devices group at MIT develops empowerment technologies for health. We believe that innovation and design happens at the frontline of healthcare where providers and patients can invent everyday technologies to improve outcomes."

They employ the use of everyday products ranging from toys to items found in an ordinary home's junk box to develop low cost medical devices for third world countries. The technologies mentioned in this article could easily be integrated within Little Devices research to create enhanced medical tools. The uC's that have an analog front end like Analog Devices ADUC7601 precision analog microcontrollers are key to the development of low power, and efficient health monitoring wearable medical devices. Very interested article Charles! Below are links to MIT's Little Devices Group and Analog Devices ADUC 7601 precision analog microcontroller.

ADUC7601:http://www.analog.com/en/processors-dsp/analog-microcontrollers/aduc7061/products/product.html

MIT Little Devices Group:http://littledevices.org/little-devices-big-ideas/diy-medical-technology-group-overview/

 



Mydesign
User Rank
Platinum
Embedding chips in body
Mydesign   2/18/2013 3:22:32 AM
NO RATINGS
1 saves
Charles, you are right. Now lots of developments are happening in medical electronics and many old manual equipments are becomes most soficated devices due to the advancement of technology. There is no doubt that within a couple of years, embedding self monitory and communicating chips in human body may become popular.

apresher
User Rank
Blogger
Innovative Medical Design
apresher   2/15/2013 9:31:37 AM
NO RATINGS
Chuck, Is it your understanding that most of these new wearable medical devices are also disposable to some extent?  Meaning that they are aiming at low price points and volume applications?

Elizabeth M
User Rank
Blogger
Re: Why Throw-Away?
Elizabeth M   2/15/2013 6:47:44 AM
NO RATINGS
Nancy, I completely hear what you are saying, but I can sort of see both sides. On one hand I, too, think reuseable is the way to go to eliminate unnecessary waste, since there is already plenty of that. But I can also see how it would be nice to have fresh, clean patches or devices to use if it's something for the long term. At the same time, if it's meant to be used long-term, you're right, it should be made to last.

Cabe Atwell
User Rank
Blogger
Re: Why Throw-Away?
Cabe Atwell   2/15/2013 12:10:58 AM
NO RATINGS
Since it’s medical, none of the wearable devices will be cheap. Innovation is apparently there, but can we seriously say it will not come at an arm&leg price? In the latest State of the Union speech (2/13/2013), President Obama essentially said he will plead with pharmaceutical companies to get medical prices down. I’m sure they will humor him. C

Charles Murray
User Rank
Blogger
Re: Why Throw-Away?
Charles Murray   2/13/2013 1:47:17 PM
NO RATINGS
I definitely agree, Nancy. I would definitely prefer a nice, clean unused patch as opposed to one that has spent multiple hours at the gym.

Nancy Golden
User Rank
Platinum
Re: Why Throw-Away?
Nancy Golden   2/13/2013 1:37:08 PM
NO RATINGS
Thanks for the explanation, Charles - I was envisioning a much more expensive product. It certainly makes sense with low price points. I also would prefer a "new" product rather than a "refurbished" one when it comes to medical equipment. Really nice to see these products being developed - it will really help folks stay active which will only increase the health benefit.

Page 1/2  >  >>


Partner Zone
Latest Analysis
If you didn't realize that PowerPoint presentations are inherently hilarious, you have to see Don McMillan take one apart. McMillan -- aka the Technically Funny Comic -- worked for 10 years as an engineer before he switched to stand-up comedy.
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
When my daughter decided she wanted to study engineering, I was very proud of her. At the same time, in the back of my mind, I wondered if she knew what she was in for.
AutoDesk has teamed up with 3D scanner provider Artec to link CAD software and 3D scanners to make it faster and easier to create accurate 3D mesh models for printing or digital use.
More:Blogs|News
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service