I understand that, but did the cell fail from being overheated, or did it become hot because it had failed? The folks at Tesla and others have said that this type of pack requires active cooling. If that's true will an overheated cell fail by shorting, or was the cell poorly constructed, shorted and then caused the thermal runaway?
the cell presented is not the one from 787 but the technology should be similar.
The 787 battery pack has 8 cells serial hard connected. The cells can not be individual switched off in case of failure. The damaged cell still getting power from the good cells and aggravate the issue.
The classic question. Was it a manufacturing problem in the battery pack that caused the cell to short or did the pack overheat and then a cell failed, as so many people looking from the outside have suggested?
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Independent science safety company Underwriters Laboratories is providing new guidance for manufacturers about how to follow the latest IEC standards for implementing safety features in programmable logic controllers.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.