56ml, I was not trying to denigrate government research, or DARPA, in general. On the other hand, we hear more about this than we do about privately funded or univeristy research, for obvious reasons. Thus, we have more to "comment" on. I have worked on DARPA funded projects, Atomic Energy Commission funded projects (long ago) and corporate R&D funded projects. The DARPA projects were mainly about things that had not been done yet, and were perhaps premature. That's appropriate for such an agency.
I direct you to eafpres' comment. Is this really a research project?
bob from maine also has a very good point. Our military services are really wonderful organizations in many ways, but there are still some major bureuacratic issues that need to be dealt with before some major effeciencies can be realized. Just as an example, the Army, under criticism for its choice of cammo for uniforms, talked about adopting the Marine uniform patterns. The Marines shot back, no you can't, that's ours. Of course it is not theirs. Those patterns are property of the US Government (meaning us). I saw a lot of this, along with some major sharing, when I worked in the aerospace business.
Interesting, Bob, I didn't know that bit of history about the Army. It actually seems like something like that is a more fuel efficient and practical option that creating some kind of super fuel that is specialized. And streamlining across all military branches seems like a no brainer, even though as you point out it's just the opposite!
Good points, TJ. Personally I think local is the way to go, and am more interested in the military's use of alternative sources of fuel and setting up local solar and wind arrays than in this type of investment. There are definitely some other military efforts in terms of energy sourcing and consumption that are more appealing both financially and ecologically.
I hear what you're saying, naperlou, and it's completely true. If you want innovation, you really have to look at private business. I wrote about the government for another publication for about two years and in that time I felt like I was writing the same story over and over...the government was pondering this or that legislation and really meant to address it imminently, but it never happened. I do think, though, that DARPA is an exception, but they work with the private sector (ie, Boston Dynamics) to do a lot of their robotics innovations.
Should this come to fruition, the army has added a huge burden to its logistical tail. Instead of being able to source fuel locally, the army will have to bring it with them from much further away. The army claims switching would reduce its logistical burden, but that statement sounds like smoke and mirrors.
JP8 seems only to be used by the US military and some allies. However, this article:
My Ph.D. professor and many of his student are largely responsible for the multiple advances that made commercially viable LED possible today. We did research at the university and published papers, everyone of which was supported in part by the predecessor of DARPA. To denigrate government sponsored R&D is overreaching in my opinion.
In my nearly 40 year career outside of the light-emitting field, I have worked in two prestigeous Fortune 50 research labs. Most projects don't pan out. To the outsider, it would be called waste and abuse if those government work. For corporations, everything is just fine to the same people. Research is hard. If it were easy, it would already have been done. Few people are as intelligent or knowledgable as those who read these blogs and comment. If the whole population were as smart as we are, we would just be average Joes. In this economy, we would just be scraping by, not enjoying our comfortable life.
DARPA does some good work, naperlou, but I generally agree with you. Too often, government is behind the curve. This is often true in electronics, where the best graphics processors are avilable for games, not defense.
At the end of WWII the Army had a multi-fuel-engine that they put into most of their heavy duty trucks. They ran best on diesel but as the instruction manual said "If it'll burn, it'll run in this engine". The engines weren't very fuel efficient but no matter where in the world you ended-up, you could always find fuel. Navy ships that used boilers burned bunker-C, what's left over after just about everything else had been refined out of a barrel of oil. They also burned crude oil. Naval aircraft have been using a different Jet Fuel than the Air-Force for years. As engines get more efficient and specialized, the fuel required becomes more specialized. Research on fuels by the military is nothing new, but it's a sure bet that if the Army is able to derive a single-fuel approach, the Air-Force, Navy and Marines will find another method.
Wow, let's just reinvent combustion research! Seriously, don't you think that, say, taking each of the engine/vehicle platforms the military desires to use JP8 in, giving them to good engineering teams, and telling them "figure this out" would lead to answers quicker than studying vaporization in combustion chambers? I'm a scientist at heart, then a technologist, so I'm biased towards R&D. But this is over the top.
Elizabeth, one fact that you mention in your article is interesting and all too familiar to me. The fact that the single fuel policy (which is a good idea) was originally put forward in the 1980s. Consider what your article says. They are just now getting around to doing some of the basic research. This is just sad. I did a lot of government and corporate funded research over the years, and it often seems that the government is generally behind the curve. Remember, all of the systems they used are made by industrial concerns, not by the government. I remember when that decision was made in earnest. I remember because my father worked at an Army research lab. He was lamenting that they were contracting everything out.
This situation is also interesting in relation to autonomous vehicle research. The government, again for the military, has been looking at this since at least the 1980s. Who is really doing it now, Google. The whole situation is that the government sometimes starts to work on things when they are really are not feasible. I saw a lot of that. That is why a lot of the talk about DARPA in Design News amuses me, sometimes. It might be much more interesting to see what is being done in Japan in robotics. They are doing some really innovative stuff and it is not in the military realm.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
