HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Jigar Patel
User Rank
Iron
Cam Follower Prototype For Clean Energy - Gif File
Jigar Patel   2/3/2013 11:12:42 PM
NO RATINGS
Cam Follower Prototype For Clean Energy Gif

 This is my cam follower prototype for clean energy cheaper than coal. Cam is used to open and close valve of internal combustion engine. I am going to show you another use. In my cam follower system,

1. Follower is off set.

2. Force is applied from follower to cam. Since the follower is off set this force help cam to rotate.

3. We use energy(Input energy) to move follower and get energy(output energy) on cam.

4.Follower move down less and help cam to rotate 6 times length of follower displacement at 70 % force. So output energy is 3 times of input energy. You can find research description and prototype video at http://mechanicalresearch.info/



Partner Zone
Latest Analysis
When you think of the DARPA Robotics Challenge, you may imagine complex humanoid contraptions made of metal and wires that move like a Terminator Series T-90. But what actually happened at the much-vaunted event was something just a bit different.
The machine is claimed to be the largest and most powerful electric pipe-bender on the market, exerting nearly 500,000 lb-ft of torque.
Traditional dev kits are based on a manufacturer’s microcontroller, radio module, or sensor device. The idea is to aid the design engineer in developing his or her own IoT prototype as quickly as possible. A not-so-traditional IoT development kit released by Bosch aims to simplify IoT prototyping even further.
This consulting firm has put together a report detailing the growing biomimicry design field in the US and around the world, from naturally bacteria-repelling surfaces to keratin-inspired polymers.
Here's a list of engineering and tech jobs ranked by outlook, work environment, stress, and income.
More:Blogs|News
Design News Webinar Series
1/28/2016 11:00 a.m. California / 2:00 p.m. New York
12/8/2015 11:00 a.m. California / 2:00 p.m. New York
2/18/2016 11:00 AM PT | 2:00 PM ET
2/24/2016 11:00 AM PT | 2:00 PM ET
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jan 11 - 15, Designing ARM Devices Using Segger Tools
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service