Thanks, jmiller. I forwarded that info to my husband for dealing with our oven--maybe. He works in the paint department of a hardware store. He says the controls for his paint mixers have gone from standard toggle switches (and pot dials) over to touch pads. Where once he could change out a switch, he is now "stuck with the infernal pads." The springs weaken, but worse, the electronics board on which they rest stared to flex backward over the years. When the first repair tech came through to deal with this problem, his "solution" to an inoperable pad was to cut a hole in the plastic which overlays the button to grant the switch more travel. Eventually, my husband says he glued little plastic bumpers to the buttons to be able to use them at all.
I will warn people because I'd hate for someone to try and fix something and not be able to get it back together. However, often if you can get the touch pad out of any machine and then take it apart you will find the plastic parts, springs etc. inside the machine and these can be modified to solve the issue. For instance if you are getting a stuck button error message you can shave off a little plastic to provide some clearance and prevent the stuck button. Be careful not to shave to much. You really can't glue plastic shavings back onto a spring. If there is a button that will not push you can use a peice of tape or a sticky note as a shim by placing it on the bck side of the touch pad. Just some of the tricks of the trade to get machines out the door when the parts aren't exactly what you ordered.
I'd love to be able to do that, in particular to get rid of car noises that tell me the door is open (duh) or the seatbelt isn't fastened (duh again since I'm OCD about that item). For PC noises, I've always just disabled the sound in the control panels. At least on the Mac you can easily do that, don't know about a Win machine.
On a related note, I have cut out the speaker on a few devices over the years. It started with removing the "pc speaker" some decades ago. Those were horrid when the PC would have issues.
jmiller, I remember being told exactly the same thing back in the 90s, but as a member of the press. What arrogance. Also, in many cases, how inaccurate. Also, thanks for the info about the touchpad. That's what my husband said. Of course, the answer is infuriating, because that means we can't fix it ourselves and basically, we've been given a poor design and told to live with it.
I agree about the beeping appliance volume control. However, I need to point out that annoying cell phone beeps have now been replaced by someone else's annoying idea of "music."
It's interesting how when you look underneath those touch pads it's just the same plastic pieces behind the membranes. Unfortunately, the mechanical spring has been removed and without a good ole metal spring the plastic just can't handle the lifetime load. I guess someone should have realized that plastic deforms when it gets a little warm and without a metal spring the buttons going to quit working.
I was actually told by one of these "marketing" people that the American consumer will like what we tell them to like. Therefore, they had the right to tell us what to make because the consumer would like it. Funny how often the consumer doesn't necessarily like what they are told to like.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
