Ummm, substantially more expensive than any piece of equipment Kinko's currently has, Maybe one per major city.
And I believe the major components have to be treated prior to assembly for the process to be effective. Given the difficulty of disassembling a cellphone (especially an iPhone, designed to be difficult), this doesn't seem like a starter.
But it might be an interesting device to have in a community "maker shop."
This already exists. LiquiPel does it and they are in the process of opening mall kiosks. This would not necessarily be prohibitively expensive if it is priced as an add-on with a reduction in the cost of insurance or a reduced deductible.
Dave P - not only are the florines nasty, but nano-materials themselves are of questionable safety.
I know, let's coat things that we handle every day with our bare skin (some people every few minutes) with something of unknown biological activity.
If you dump your phone in the toilet, learn the lesson and be more careful next time. For me, I have 99% alcohol handy in my home to dry out any electronics that get wet.
Sorry 3drob, this was not meant as an ad---I actually tried this on my niece's phone and I meant it to be a reply regarding apresher's comments about the cost prohibition in commercial cell phones---he's right, so only spend the extra money after the fact if your phone gets wet.
Actually, it depends on what brand you get. Careful shoppers look at the water-resistant Lenovo products. The keyboards even include special gutters to deflect the water from internal parts. Google and YouTube are your friends here. Some of the techniques have been patented.
Immersion damage? A much more interesting result would be if this process were found to be effective against the growth of tin whiskers, , the guaranteed-to-fail manufacturing process using lead-free solder foisted upon us by non-technical do-gooder Europeans.
If this process were found to be effective against the growth of tin whiskers, we could suddenly have phones and cameras that would again last longer than three years and cars that would not suddenly engage in fatal wide-open-throttle acceleration.
Bheestie Bags is a revolutionary device that can actually save electronics from water and moisture damage and they just released a brand new larger bag! Whether it's an accidental spill on your iPad or the device was exposed to moisture - this is the ultimate solution. Just turn off the device, wipe off any visible moisture, place electronic in bag, zip tight and let Bheestie Bag work its magic! For extreme water exposure, wait 48-72 hours. The powerful water absorbing beads physically bond and removing the water, proven to be 700 times more effective than home remedies. The bag can last up to a year for everyday use or less if used for extreme soaking. http://www.bheestie.com/Dry_My_Wet_Phone.html
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
PTC will offer a virtual desktop environment for its Creo product design applications, potentially freeing engineers to run them from remote desktops on a variety of operating systems and mobile devices.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
Now that solar and wind harvesting technologies are a thriving market, researchers are seeking other environmentally related energy sources for which they can create harvesting devices.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
