Ougassing should have been observed during tests. True, low atmospheric pressure might accelerate outgassing but the atmospheric pressure inside a (pressurized) commercial aircraft cabin is generally in the range of normal.
I also think vibration could be the culprit. (see my comment, above).
That's a scary thought, Bill. It's not hard to imagine Boeing deliberately choosing cobalt oxide for the higher energy density. That's its chief advantage over other lithium-ion chemistries and it's the reason many engineers choose that chemistry. But as for their alleged lack of a cooling system: It's anybody's guess. I think a lot of engineers are still climbing the learning curve when it comes to all the lithium-ion chemistries.
I can't believe Boeing would use a battery design that was not so carefully bench tested that there was absolutely no way it could overheat no matter what happened to the charging circuit and no matter how little cooling was available.
On the other hand it is quite possible that due to vibration in the aircraft, the electrodes might go into a vibrational resonance allowing a couple to touch each other and cause an internal short. This could be difficult - but not impossible - to simulate on the bench.
Very good point, Paul. Elton Cairns of the University of California agrees with you. He told us that the higher, colder altitudes were a detriment, not an advantage in this situation. Cairns, by the way, should know: He designed the PEM fuel cells for the Gemini spaceflights in the 1960s.
Given the importance of this issue to Boeing, I would be shocked if it kept the 787 down until 2014. That would be a major setback to a very high profile program. But I also think their engineers will also be very careful in avoiding missteps in implementing a solution to this problem. Not an easy thing to have the world watching while you solve a complex technical issue.
They will get it right eventually, Liz. But it could take a while. Over the weekend, CNET published a story in which they, too, interviewed Donald Sadoway of MIT. Sadoway told them that the problems could keep the 787 fleet grounded until 2014.
If this is true, then it's a bit scary to think this could happen again. Let's hope engineers get the battery chemistry right next time so something like this doesn't happen again and cause an even more dangerous situation.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is