We're working at the grass roots level with lithium systems in E-Scooters and we're having our problems although not quite as dramatic as Boeings. The battery management system does what it's supposed to do where temperature increases beyond a certain level opens the circuits...somewhat inconveniently after about 3 blocks of hard acceleration. Troubleshooting indicates that by disconnecting the battery, pausing, then reconnecting resets the system, and as long as a reasonable acceleration is the input the system works continuously. As soon as a higher torque (hence amperage increase) is applied to the drive system over a certain length of time the system cuts out. Our solution to this irritation is in work consisting of a hybrid battery system using lead acid for acceleration and lithium for cruise, the controller being rigged to accomodate the changes. Boeing's solution may be the same in the long run...cooling systems are just another aggravation, but hybrid battery systems rigged through a reliable controller may be slightly heavier but likely not as heavy as a cooling system and have the advantage of no dead weight (all batteries being functional)
Not so puzzling. Before you design in a cooling system, you ask how high can you go without it. For example, if a transistor is rated with a junction temperature of 150 degrees, I would let it heat up to 100 degrees before I put a fan in. Thats a 33% margin. Cooling at sea-level is not the same as cooling at 8000ft equivalent alitude in a pressuized airliner, though.
Boeing will suffer politically, regardless of the decisions they make now. Their best option is to have a replacement strategy defined and a timeline for implementation & FAA approval before the end of this week. Any more delay will cripple their Dreamliner, giving the A380 a huge advantage.
It's possible the cooling was 'built-in', i.e. the design current draw and subsiquent heat load was lower than the thermal capacity of the unit as installed. That's how zillions of the small and ubiquitous lithium batteries consumers use every day work. It'll be interesting to see how this story plays out. Certainly some mistake was made somewhere, but we seem to be jumping to conclusions
Good point William. I wonder if the energy density of the lithium-ion battery system with an additional cooling system would now be less-favorable than the energy density of the traditional/proven battery technology (without the additonal cooling system).
Chuck, do you get a sense that perhaps Boeing moved to the cobalt oxide cathode lithium-ion batteries to shed weight and then made a decision to not include a cooling system that would have added net weight? It is feasible that this type of failure is only found after the 787 is used in process and not in testing and that Boeing can find a safe fix. Gosh, I sure hope that it does not turn out to be known, debated cost-saving management decision that turns political...
The lack of a cooling system would be very puzzling. According to a friend of mine who is a battery guy, lithium ion batteries are the highest energy density and are one of the most volatile chemistries, so correct charging and cooling are of paramount importance.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.