Getting full recompense on something as big as Office is impressive, Ann. With big products, you usually have to dig your heels in and be ready for a battle.
Clinton, thanks for the info on SpeedQueen. My GE washer and dryer are still working fine, although we've had to do some minor repairs here and there. But they're both 12 years old and I know someday maybe soon I'll need to replace them. Red sparkly appliances? Wow. That sounds over the top. I'm not fond of white appliances either (my fridge is a black Kenmore), but since the white GE W&D are out in the utility room, at least I don't have to look at them often.
Al, you did luck out. The only thing similar I've experienced is when Microsoft gave me a free replacement of the entire MS office package, back when it was even more hideously expensive (in relative dollars) than it is now, in recompense for a tech support screwup. Those were the days...
I agree with your "soft rule" on all counts, rickgtoc. A lot of stores make their money on selling warranties for products that will be superceded by better, cheaper models in a few years. They know that in 3-4 years, most people won't want to repair the old product. I also agree about warranties on cars. Today's vehicles are much better than those of 30 years ago. I'll take my chances with them.
rick, my rule is very similar, with the same cutoff amount (although that's a moving target). I learned the hard way, thankfully on small inexpensive consumer electronics. I also don't buy extended warranties on any white goods, even ones that cost more than $500. Good point about computers--they're a different animal.
I have a nominal "rule" for those things now. I made a mistake in buying a 4 yr extended warrranty on my first (and still only) plasma flat screen. About $2800 a the time, I worried that I would have an early failure and be faced with a buy/repair decision. What I neglected to consider is how fast prices would plummet on flat screens over the next 18 months. And the plasma is now 6 years old and running without incident.
My rule now is pretty soft, but it generally goes like this: If the device is likely to be superceded by newer cheaper models in the next few years, and/or the cost is $500 or less, and I wouldn't be terribly inconvenienced by a failure (or I might be able to fix it myself) -- NO EXTENDED WARRANTY. So flat screen TV's, smart phones, laptop PC's under $600, home audio and appliances like vacuums don't rate an extended warranty.
A high end laptop PC ($1200+) on the other hand, would probably rate the warranty, but for no more than 3 years, and perhaps only 2.
I'll still probably buy one on the next washer we buy, because I don't expect its design to be obsolete in 5 years, and I don't expect replacement cost to decline by much over time.
Now cars are another matter. I almost bought the maint. agreement for my last new vehicle, and then decided to cancel a couple of days later. After all, one of my reasons for choosing that particular vehicle was low maintenance costs and high reliability. And it hasn't disappointed me.
I have a nominal "rule" for those things now. I made a mistake in buying a 4 yr extended warrranty on my first (and still only) plasma flat screen. About $2800 a the time, I worried that I would have an early failure and be faced with a buy/repair decision. What I neglected to consider is how fast prices would plummet on flat screens over the next 18 months. And the plasma is now 6 years old and running without incident.
My rule now is pretty soft, but it generally goes like this: If the device is likely to be superceded by newer cheaper models in the next few years, and/or the cost is $500 or less, and I wouldn't be terribly inconvenienced by a failure (or I might be able to fix it myself) -- NO EXTENDED WARRANTY. So flat screen TV's, smart phones, laptop PC's under $600, home audio and appliances like vacuums don't rate an extended warranty.
A high end laptop PC ($1200+) on the other hand, would probably rate the warranty, but for no more than 3 years, and perhaps only 2.
I'll still probably buy one on the next washer we buy, because I don't expect its design to be obsolete in 5 years, and I don't expect replacement cost to decline by much over time.
Now cars are another matter. I almost bought the maint. agreement for my last new vehicle, and then decided to cancel a couple of days later. After all, one of my reasons for choosing that particular vehicle was low maintenance costs and high reliability. And it hasn't disappointed me.
rick, I've had the opposite kind of luck with extended warranties. Bought way too many of 'em I never needed, even on big-ticket items like washing machines. Sounds like you've had the kind of luck that makes them a necessity.
#1) Isn't ROLLS ROYCE now part of the VOLSWAGEN family of companies? So, I would NOT think that using a $100K to $150K priced vehicle IS necessarily a good analogy.
#2) I have owned several VICTORINOX pocket knives in my life, and I would agree w/ the other blogger. I don't think their price point is necessarily optimum. In fact, purchasing one with only a few basic functions is somewhat pricey.
#3) Is SPEED QUEEN still in business? IF SO, why does one NEVER hear of them, OR see any advertising for their products?
#4) In the 1950s / 1960s/ 1970s /1980s, we had a HAMILTON gas dryer. It ran & ran & ran, and NEVER got a "checkup" or saw the repairman in all those years, until one day part of the gas ignitor system failed. Unfortunately, HAMILTON had ceased operations, and this particular part was NOT available as a generic replacement. We bit the bullet & purchased a replacement, BUT not without much wailing & gnashing of teeth, as the it was carted out of the basement. I'd be willing to bet that the carcass served as a source of parts for other malfunctioning HAMILTON drtyers until it was picked to its bones.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
