A very interesting subject. I think this is an area that we're just scratching the surface on. At some point, someone will make that crucial discovery that will enable us to apply it to commodity polymers across the board, economically, while also enhancing mechanical and chemical properties to meet or exceed those of petrolium based plastics. Is it true that most biopolymers are semi-crystalline? I wonder what kind of in-roads the industry is making in the amorphous, injection molding world? (to be similar to ABS, PC, and such)
Elizabeth, although the basic idea is quite simple, this *is* pretty specialized chemistry. And the fact that you can make either fuel or bioplastic wasn't intuitively obvious at first to me, either.
Dave, as we said in the article, Cereplast is recommending 109D for thin-walled IM applications, and, as a resin in the company's Sustainables line, it's targeted at automotive, consumer electronics, and packaging uses. It's clearly not aimed at the high end of durables. I agree, it will be interesting to see what specific objects it's used for.
Thanks for clarifying that, Ann. Now that I think of it, of course it makes sense that the same products can be used for fuel or bioplastic, but I wasn't sure if certain properties of the biomaterial might be different and so not conducive to both processes.
Elizabeth, corn is not ideal as a feedstock here, for the same reasons it isn't in biofuels. And, BTW, many of these feedstocks can be used for either biofuel or bioplastic, just like petroleum.
Ann, thanks for posting this. The mechanical properties of the algae-based polypropylene don't seem to be quite as good as regular polypropylene. A general-purpose, petroleum-derived grade would have a tensile strength around 4900 psi, compared to 3460 psi for Cereplast's algae-derived grade. The ductility is also quite low (3.3%, according to Cereplast, compared to 12% for a petroleum-based grade). That being said, it may be good enough for many applications. It would be interesting to see what applications Cereplast's customers are considering for this material.
Thanks, Clint. Glad you're enjoying our coverage of this subject. I've been looking more toward bioplastic and biofuel efforts that use feedstocks that are non-food, don't use potential agricultural land, and preferably use waste that would otherwise be contributing to CO2 levels.
Elizabeth, thanks for asking! No sarcasm--I'm happy to share. I find this subject absolutely fascinating. I suggest you check out the links at the end of the story: we've published several posts on a wide variety of feedstocks.
Thanks for keeping a finger on the pulse of the alternative materials market. It makes for great reading and increases awareness.
As I had mentioned in my comments on one of your earlier columns, finding a repeatable, reliable and large enough source for the feedstock makes or breaks this sort of system. It's great that Cereplast was able to use the waste stream from a what sounds like a mature company in another industry. As long as that product flourishes, Cereplast won't have to worry about raw materials.
And as their raw material is another company's waste, it is a win for the environment.
You seem to really know a lot about this, Ann...it's a bit of a new area for me. Besides algae and avocado pits, what are some of the other natural elements being used in bioplastic? Does corn play a role, as it does in biofuel? Excuse my ignorance, but it's really quite an area of interest for me. Thanks!
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
