With 54.5-mpg CAFE mandates looming, most automakers are deseperate to find ways to cut weight. If suppliers can develop the mechanical strength needed for body panels and seat components, and provide the heat resistance for underhood components, automakers will snap up these materials.
Designing trade-offs are always more complex than getting exact matches of properties. The thermally conductive compounds referenced in the article have thermal conductivities up to about 20 W/mK. While that isn't quite equivalent to aluminum at 100W/mK, it's over 3 orders of magnitude improvement over base plastics which sit at around 0.1 W/mK.
That does make these formulations viable options for heat management. We've done several design cases in areas such as automotive lighting and have shown that those sorts of conductivities are more than enough to replace metal heat sinks which in many cases are *overspecified* for thermal conductivity.
As to 3D printing. We have 3D printing capability and development programs to be able to print some of our key functional formulations. Happy to discuss further if you like.
Not that conductive, but sounds like a great material that can both house and supply data for low voltage sensors. I wonder if this is being explored. Also, a great way to send power or a signal through a enclosed container. That is if both conductive and non-conductive plastics can be molded together. Sound like this will revolutionize the automotive sector sometime soon.
I found myself wondering if there were some polymer/metal hybrid materials out there for use in automotive applications? Is that a practical tradeoff for weight, strength, conductivity, etc.? Any thoughts?
Scott, not sure what sort of construct you mean specifically by a 'hybrid.' Some of our systems are filled with various substances. Metals sometimes play a role. But the metal itself doens't play a role for strength. Obviously the trade-off when systems are more highly filled is for strength properties (flex mod, impact). I think maintaining this balance is more critical for automotive applications than say electronics. We are also looking at composite-based constructs for these types of properties. Best, Kendall -
Kendall. Thanks for getting back to me. I was thinking of something similar to the way fiberglass panels are made with a metal mesh replacing the glass mesh. Don't know if that is even practical or has been tried. It just seemed like an interesting idea.
I agree Kendall. The improved thermal conductivity of many polymers is now opening design doors that were previously closed for us. In addition to metal heat sinks that may have been overspecified in the past, new LED technologies burn cooler and brighter, so the opportunity to replace a metal heatsink with a thermally conductive plastic heatsink may now be available.
The low-hanging fruit of plastic-to-metal conversion is no longer there for the taking, but that doesn't mean there are no opportunities. This article does a good job of explaining how to go about finding these opportunities: design engineers should sit down with suppliers or other experts, with a focus on part function. You are probably not going to make the same exact part out of plastic that you made out of metal -- at least, not if you want the part to work! But, with a little creativity, you might be able to get the same function. It takes design ingenuity, along with a knowledge of what's out there in terms of materials. This is where suppliers and outside experts can help.
Are they robots or androids? We're not exactly sure. Each talking, gesturing Geminoid looks exactly like a real individual, starting with their creator, professor Hiroshi Ishiguro of Osaka University in Japan.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.