Wow, interesting problem to have! The first thought I had when I saw the headline was, "So, if you're in the Hell's Angels, you can use this particular computer?" Clever sleuthing on this one to figure out the problem!
Years ago an IBM typewriter field technician (so you KNOW it was years ago!), kept getting calls from an office where one machine seemed to malfuctioning. But when he tested it it worked fine. He even swapped out the machine, but still the one at a particular desk always seemed to malfunction.
So on one call, the secretary (so you KNOW it was years ago!). Showed him how it malfunctioned. She turned it on, put in a piece of paper, and the typewriter went into fits as her extremely full bosom rested on the typewriter keyboard.
My father was a shoe repairman in the San Diego area. He routinely added a braided ground strap to nurses shoes. They were required for individuals working in high oxygen areas to prevent sparks from igniting a fire.
He would simply take a flat braided wire and punch it through the sole and lay about a 1 inch length inside the shoe and outside the shoe and anchor the ends wth a flat rivet.
Cabe - I had the same thought. Ground problems manifest in interesting ways. I once spent days chasing an ungrounded pin on an IC that produced a slight capacitive load with an 18 hour time constant that caused the output to exhibit a slight jump. If you need a ground - make sure it is a solid ground!
I was having a look at safety boots at our local work clothing store. apparently there are various specialties including high voltage insulated for electricians and anti-static for electronics techs. I asked if I could a combination of both. It took the guy about ten seconds to say no, that wasn't possible.
My company once dispatched an engineer to solve an intermittenly working cell site issue. He soon figured out it worked when it was raining and stopped when it was dry again. Figuring it was a grounding issue, he rounded the corner outside the building to check the site's earth ground. What he found was a large copper cable stripped at the end lying in a puddle of water. The thing was, the site was mostly operational, as it was in the tropics of Bolivia. A good grounding rod and clamp solved the problem.
A secretary at a company I worked for several years ago would tell people not to walk by on the left side of her desk. One day it was me. When I asked why, she told me her computer would shut down. Not believing her, I asked her to save her work so that I could see if it was true. When I walked past on the left side of her desk, the computer did shut down. I checked to see why, and found an extension cord ran on that side, and the cord was losing connection with the receptacle.
Jerry Weinberg (of IBM and "Psyc of Computer Programming" fame) tells a couple of stories:
The first one had to do with women operators having a high failure rate with early IBM mainframes. Remember, these were in carefully controlled computer rooms.
Turns out, the dress code required the women to wear wool skirts and nylon hose. The keyboards would happily conduct those big static charges right to the input boards. The dress code was changed && IBM later beefed up the static protection.
The other one was really weird. The mainframes would overheat in a random manner. Much wailing and nashing of teeth, because the AC and room design was IBM standard. Jerry gets sent to investigate. The operators were nuns, wearing full habits. He noticed a couple standing over the floor grates, then the system overheat warning going off. The nuns were just trying to get cool, but the full skirts were altering the airflow enough.
Dress codes; how quaint that sounds today. I must admit that I often long for the days when you could tell the office personel from the janitorial staff by the clothes they wore. Let me be clear, I am not putting down the janitorial staff. There is something disheartening when a man shows up for an interview as anything other than a lifeguard, wearing flip-flops and a T-shirt. It is equally disturbing to me when I see a teacher wearing the same styles as the students, ie torn & faded jeans and the like.
I saw a picture of my dad at work at GE in the 60's. I knew he was a manager when the picture was taken - he had a skinny black tie with LONG sleeved white shirt. Before, when he was an engineer, he wore a skinny black tie with a SHORT sleeve white shirt.
One of the things I like about being an engineer: I don't own a tie.
It is amazing what a difference grounding can make. Years ago I swapped out a changer in my console stereo and was shocked to hear a 60 cycle roar drown out any vinyl disc I tried to play. I had just paid big bucks for the changer so I decided to read the instructions (instructions are only for people who do not know what they are doing) and found a note about grounding and viola end of trouble. It seems the original changer had a gounding wire incorporated in the connection which was missing from the replacement.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.