Great idea. Why spend 5 cents a foot for wire when you can invest in a complete set of radio transmitters and receivers. You not only succeed in cluttering the ether with more junk, but you have a good chnce of picking up interference from others who have made the same choice.
Junko, I was struck by the first few slides in your presentation that talked about the UI for smart TVs. We got one not long ago, and Miracast is correct. The UI on the TV is somewhat clunky with the standard remote. Being able to use a smart phone, or even a PC with Ethernet or Bluetooth, would be a great improvement. This would especially be an improvement in managing the settings on the TV. There are lots.
I have a Samsung Smart TV and use a wireless keyboard and mouse with the TV. Most of the time I use the regular remote, but when I go online or use the applications I use the mouse and keyboard.
This rush to create products to solve minimalist problems seems to be great portal into bankruptsy. Using RF networks to eliminate the need for unsighly wires or for folks who cannot plug the green plug into the green socket, will make life a bit easier for the dumbed down consumer. But those wireless speakers will either plow through a lot of batteries or will still have a power cord running around the room to the nearest outlet which is never where you need it. :-)
I don't get the trend towards the virtual dashboard. In an aircraft the glass cockpit has sufficient redundancy, pilot and co-pilot displays. But putting virtually all of a vehicle's entertainment, climate control, safety alerts into one LCD panel is a waiting single point of failure.
And if that isn't foolish enough, a large touch screen replacement for tactile mechanical controls is the road to automotive accident hell. Drivers spend little enough time engaged with what's out in front on the road without major distractions. The virtual touchscreen dashboard may someday have its place when vehicles can drive themselves autonomously. Till then, please do not make it more difficult to keep eyes on the road.
I agree. I saw a lot of TIDSU (Technology In Desperate Search of a Use) in those slides, like the voice command feature in my Honda Pilot that I've never used. I would like to have that wearable HD camera in slide 1. I can think of many uses, like while I'm flying.
That Samsung monster shown in slide 6 would take the place of the picture window in my living room. I'd grab one of the HD cameras shown in slide one and put it on the outside of the house. When not actively watching a show, the Samsung behemoth would be my picture window.
Tongue in cheek, to be sure, but boy, wouldn't it be nice to have the problem of figuring out where to put that behemoth?
Junko, Great slides. I kind of like the wearable HD camera shown in the first slide. Where there any wearable electronic companies displaying new products and technologies in this industry?
Looks like the trend is all about new was to use and interface with our technology. It is 2013 after all, it should be easier to do work. Look how a different HMI let people that used to be afraid to use a computer, seemingly master the smartphone. Unification of all tech has to be the next big usability trend.
Cabe, I agree. New technologies sometimes warrant standards that drive design unification practices. I'll be watching the developments closely of wearable devices for this year. Also, I'll be getting a hands on view of wearable electronics as I experiment with the Adafruit Flora kit.
Cabe, I believe the FLORA came out four months ago but don't quote me. Thanks for suggesting the feature article. I look forward in doing it. I got a couple of wearable concepts sketched out and will chose one to develop. I'll definitely keep you posted.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.