Nice post! Aside from knowing the price for labels, I knew that you should also consider other factors like the format. I always use euroffice avery labels coz its easy to use with my printer.
Usually when there is an issue with a white paper backing left behind the culprit is a low grade rubber based adhesive. These adhesives are an excellent choice from a price standpoint but quickly set up especially when exposed to UV light. An example we can all relate to would be masking tapes that get applied to a window. If left to sit for a few days, they're just about impossible to remove cleanly.
As far as sticky residue being left behind, that is usually one of two issues. The first would be a low grade (rubber or acrylic) adhesive that has been applied to a plastic surface. The same plasticizers that make plastic flexible begin to migrate out of the binder and into the adhesive. A good example would be a clear transparent tape applied to the cover of a vinyl binder. After a while the adhesive becomes gooey and leaves behind a residue when removed. The second issue usually results from achieving a good bond using an acrylic adhesive which simply doesn't allow the label to separate cleanly from the affixed surface.
At Mcloone we generally hear "I want my label to stick no matter what!" but when a customer needs a removable label we utilize 3M adhesives specially formulated for removability without residual residue. If you have any additional questions we would love to discuss them with you! Call 800-624-6641 to speak with a member of our customer care team. --Karen
I always take issue with labels that do not come off cleanly - the ones that leave a white paper backing or sticky residue behind. Is it simply because it's a cheaper label or are their other factors at work here?
Thank you for your comments! At Mcloone, we produce UL and CUL labels on a regular basis and agree with you that each label should be treated with the same importance. Everyone can benefit from designing the label correctly, the first time.
Excellent Post Karen. I retired from the appliance industry a few years ago and mainly dealt with UL and CSA (Canadian Standards Association). Generally, the labels affixed to our ranges were on painted surfaces. Readability and indelibility were the key factors and to your point, both agencies had to approve the material, adhesive and wording for each. Even the format was regulated to a great extent. We gave specific attention to warning and caution labels because they were not detailed in the specifications and yet, we felt, were every bit as important as the name and number plates.
Thanks for your comments Cabe! Mcloone specializes in a variety of labels, nameplates, and decals used for product embellishment. We also utilize quality industrial grade adhesives capable of withstanding harsh environments.
Because material/adhesive choices are so specific to the application they're being used for, it's difficult to recommend something without knowing more details about the sticker. We would be happy to discuss some options and answer any additional questions you may have. Please call 800-624-6641 to speak with one of our customer care representatives. -Karen www.mcloone.com
Perhaps it's an old school approach, but I need a sticker for product embeleshment. Think of the stickers applied to 1980's Transformer or GIJoe toys. Except, I want mine to be impossible to remove. The license plate sticker would be a great choice. Anyone know where I can get stickers made like that?
For plastics, yes. Design an insert into the mold, and use an insert plate to emboss the text into the plastc. A lot of manufacurers do this - you can see it on many consumer products.
The license plate year stickers that I must apply each year with my registration renewal are pretty darn impressive. They have to withstand 140 degree temperature swings over time, direct water contact, and they stay on no matter what.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
