Again, Larry, I am not a mechanic-type person and don't change my own oil! I leave that to the experts...so of course I wouldn't really understand this method for checking transmission fluid. I still think it's sounds a bit complicated and from the comments I've read it seems like there is.
The reason the dipstick was eliminated on this model is that most people do not relaize the extent to which ATF density changes with temperature. If the dipstick were checked cold, and the ATF level topped up cold, the fluid would grow in volume (lose density) to the point that rotating elements would be immersed, leading to foaming and the potential for slippage as a result.
Even a substantial number of dealer technicians were not checking the dipstick with engine running at full operating temperature, as specified.
Warranty claims went DOWN with dipstick elimination.
The ATF recommendation at release was "fill for life" except for towing or extreme high temperature service.
Elizabeth M wrote: I'm not an auto geek by any stretch of the imagination but that has to be one of the most poorly designed ways to check a car's transmission fluid level if I've ever heard one!"
The differentials on all cars are checked this way--you fill lubricant through the port on the side until it runs back out. And surely, Elizabeth, you check this level every time you change your oil. Why is is surprising that you might check the transmission lubricant the same way, and at the same interval?
Now that cars can go 100K miles without anything more than oil changes it doesn't make much sense to design maintenance access for a system that is not servicable. The economics makes sense; Save $3 per car by not installing access to a system that should never need attention outside of a garage. Now multiply this mind-set by 4 or 5 systems in a car (brakes, cooling system, spare tire) and spread that over 2 or 3 million cars and pretty soon you have saved enough to buy your way out of bankrupcy.
Transmissions have become the weak link in car reliability. Engines typically last >200K, so now the trannmissions have to last longer, but they do not. There are numerous models wiht transmission problems. Honda Odessy,2000-2003; MDX, 2001-2004; Ford/Mazda- lots. GM in particular has been mentioned here- I find their engines are faily good, but all the ancillaries, especiall electicals, do not last. Even their "solid" 3.8 engine had faulty intake manifolds, 1998-2005 why could they not fix the design in 10 years?! Car manufacturers simply do not care about the consumer. "Build 'em fast, build 'em cheap, to heck with the consumer" seems to be their mottos.
I guess they just want to make everything harder for the user. What's next? under the car to check every fluid so you don't do it, but take it in to get checked!? Crazy...no..BS!
Interesting observation, GTOlover. I always assumed that the "hard-to-work-on" phenomenon started in the 1970s. I had a '62 Impala that was pretty straightforward.
Don't consider this a purely domestic situation. Many of the Daimler Benz transmissions are sealed. In fact at Chrysler corp the transmissions first were sealed, no dipstick and filler, while Daimler owned them. I don't know if this was to prevent medling or simply that they expected the transmission to go high miles without maintance.
As some readers have pointed out, are not designed for maintenance, which can be infuriating at times.
I was told by a car buf once that the car companies aren't interested in designing cars that are easy to work on because they make MORE money when you bring the car to the dealership for repairs. Anyone who has taken their car to a dealer for a repair knows that the experience is more like being taken to the cleaners!
It's a shame that a country that put men on the moon, can't (or won't design cars that are easier to repair.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
