The schematic was drawn in Sunstones free printed circuit board design program, PCB123. PCB123 does not allow any format other than theirs. The only way to transmit the schematic to design news was via a screen capture and a JPG conversion. If you want an electronic version, I will be happy to email anyone a copy. But PCB123 does not allow any format other than theirs, so you will have to download PCB123 to be able to open it. If you are interested, email me and I will send you a schematic and the code for the PIC. If you plan to build one, I would be happy to program the PIC for you if you don't have the means to do so.
The force is simply the hydraulic pressure times the surface area of the cross section of the ram. The pressure transducer was calibrated in the laboratory and the instrumentation amp gain is set to allow maximum range for the A/D converter in the PIC. The PIC does the simple E.U. conversion to provide the LCD display with actual pounds force exerted by the ram.
I agree. Seems like a very practical idea. I'm curious, though. In hydraulic ram press applications in the past, how was the force calculated? Mr. Nauman mentions counting the number of pumps on a handle. Was the calulation really that crude?
Now, that's a really practical device a lot of shops can actually use. I'd love to see the source code but I can understand it not being there. You could actually market the device. What transducer did you use? I like the fact that you made it look good by putting the lettering on the front panel. It shows you didn't just make it for yourself. Good work.
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Design News and Digi-Key presents: Creating & Testing Your First RTOS Application Using MQX, a crash course that will look at defining a project, selecting a target processor, blocking code, defining tasks, completing code, and debugging.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.