HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Cabe Atwell
User Rank
Blogger
closed
Cabe Atwell   12/13/2012 3:51:02 PM
NO RATINGS
The more axis, the more chance of accumulating errors. Without a closed loop, 5-axis machines would be machining nightmares. I have a closed loop mill and I recently built an open-loop one for little projects. In the open-loop one, I can see where I lose steps. Over time, if that problem isn't addressed, the home(zero) drifts.

As a side note, I plan on adding a CNC rotary table to one of my mills. Closed loop is a must. That will make my design harder. (closed loop on a stepper? Yikes!)

C

apresher
User Rank
Blogger
Enabling Technology
apresher   1/4/2013 11:58:16 AM
NO RATINGS
Jens,

What are the most significant technology advances (software or hardware) that are improving these applications for 5-Axis machining? Obviously there are advances in position accuracy and repeatability of the feedback devices and more available processing power, but are there also algorithm developments and more sophisticated application programming techniques that are driving the advances in this area as well?



Partner Zone
Latest Analysis
Following in the tracks of the fabled rocket plane programs of the 1940s, NASA engineers are now laying the plans for a new twist on the future of aviation -- a battery-powered airplane.
Laser engravers can be great tools for DIY projects. But they can also be pricey. Gadget Freak shows you how to build your own CNC laser engraver using an Arduino board.
Your home could someday be filled with hundreds of connected devices. What's going to coordinate it all? According to iRobot, it could be a vacuum with machine vision.
Researchers at the University of Buffalo have developed a nanocavity to potentially improve the design of ultrathin solar panels, video cameras, and other optoelectronic devices.
The Industrial Internet of Things may be going off the deep end in connecting everything on the plant floor. Some machines, bearings, or conveyors simply donít need to be monitored -- even if they can be.
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course June 28-30:
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service