Firstheck the microwave seal - there are some monitors that provide this information to determine if it is still good or not.
If it is then proceed below. 1) if you have an android or ios device - use one of their WiFi analyzers to see where your microwave oven is transmitting (microwave has to be on)
2) if it is transmitting on the lower or upper channels, you can simply go in to the router/access point configuration and change the channel to one that is not impacted. This usually can fix the problem.
3) if you can't do that, you can check to see if your wifi devices support the 5GHz range and change the router/access point to use that band.
The streaming audio player will appear on this web page when the show starts at 2pm eastern today. Note however that some companies block live audio streams. If when the show starts you don't hear any audio, try refreshing your browser.
Using a 3D printer, CNC router, and existing powertrain components, a team of engineers is building an electric car from scratch on the floor of the International Manufacturing Technology Show in Chicago this week.
In November, a European space probe will try to land on the surface of a comet moving at about 84,000 mph and rotating with a period of 12.7 hours. Many factors make positioning the probe for the landing an engineering challenge.
NinjaFlex flexible 3D printing filament made from thermoplastic elastomers is available in a growing assortment of colors, most recently gold and silver. It's flexible and harder than you'd expect: around 85A (Shore A).
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.