I personally like Anti Lock brakes, and traction control, which both somewhat fall under the category of "black boxes" taking control. I think the actuarial data on antilock brakes would prove that the average driver is better of with them than without. If you drive on snow and ice you come to befriend traction control if you use it. I feel much safer on ice with traction control and antilocks. I attempt to drive in a way that doesn't cause them to work, but I take comfort in the fact that when I push a little too hard, the electronics kick in and correct.
Allison makes automatic transmissions for trucks now, and I'm sure that most "skilled" drivers would bad mouth the automatic over the "control" that a clutch (supposedly) gives them. Allison does pull-offs with experienced drivers using manual transmissions, pulling against inexperienced drivers with automatic transmissions, and the experienced driver with a clutch never wins against the automatic.
I understand the reservations about the black box thing, but in time the technology usually proves itself worthwhile.
Another example is the "launch" electronics in formula cars. Drivers first resisted it, but relented when the guys using the launch control were driving up their tailpipes on every start.
As for enabling idiots to get behind the wheel, we already do that. So you might as well make the car smart enough to drive, because many of the people we give licences to aren't.
It is an interesting assertion that somehow cars are becoming safer because of all of those unreliable electronic systems being added. They are unreliable because the primary design target is minimum cost to produce them, all other considerations are secondary. Even worse, the systems all are set up to protect the very most unskilled and ill-prepared drivers, which means that they will be constantly fighting against the experienced drivers, who probably are at least half of all drivers. On top of that problem, none of the vehicle safety features that I have come across is able to handle exceptions. The ABS system assures excessive stopping distance on loose gravel and when there are leaves or sand blown onto the road surface, and the stability control system assures that a very quick swerve to avoid something will not be done the way the driver intends it to be done. They will probably protect a 17 year old beginner driver, and possibly the 90 year old grandmother, that is true. BUT most drivers are not in either one of those groups.
UNFORTUNATELY we are no longer allowed any choice about which systems we will have operating in our cars. So a whole lot of us will be fighting with systems designed soley to protect that portion of folks who perhaps should not be driving at all. Is this a benefit for society?
You know, there is a slippery slope on this topic. While there's no argument that electronics advancements have increased safety in vehicles over the years, (airbags & curtains, proximity sensors, back-up cameras and Bluetooth hands-free audio as a few examples) there are other electronic innovations that I simply just do not support; such as automatic braking in high end sedans currently. This type of "Safety" feature I think is more of a problem than a solution, lulling the distracted driver into a sense of security. And the Ford Focus that can parallel-park all by itself-? Fantastic technology, but it allows the incapable operator to climb behind the wheel. I can't support it.
Meanwhile, it was refreshing to see that the Delphi CTO had a short list of electronics advancement being developed that sounded more valuable to safety and performance than these two marketing gimmicks of auto-brake and auto-park.
Ghost in the Machine? Self realization of the machines?
I like the last line, "open up many doors and windows", does this imply that the car will 'sense' the owner and open the door. Open the windows as the occupant approaches drive-thru venues. Or is this just a play on words? Funny either way!
TJ McDermott, I agree. When it comes to vehicle safety, I like to be in control as to some software running on a black box. I believe one key to vehicle safety is to pay attention to the road while driving.
I'm not ready to let a programmer decide what course of action to decide vehicle safety. The operator in charge should always have the final decision.
The Airbus crash at the 1988 Paris airshow makes this point clearly. The pilot and flight control computer got into disagreement as to what the plane should do:
I wonder if they will also start to use artificial intelligent software that will start to learn different drivers and how they drive and where their weaknesses are. It's all very exciting. Good article.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 4
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
