Typically, an automotive master cylinder is actuated by a rod, either from the brake booster or directly from the pedal. The rod is not generally directly attached to the piston in the master cylinder. It is not uncommon for the piston to hang up in the bore after brake release, and for the brakes to drag a little. This is not usually a problem, and the brakes don't usually drag to the extent that they smoke.
It doesn't surprise me that there would be corrosion in a boat trailer brake cylinder. Boat trailers are often submerged in water, and sometimes in salt water! The brake cylinder used in a corrosive environment like this should either be well-sealed or made of materials that don't corrode, like the one that you installed.
Hydraulic brake systems are not maintenance free. Brake fluid, being hydrophilic, will absorb water over time and the corrosion seen on the aluminum piston/bore is the end result. Bleed your system out yearly refilling with a high quality brake fluid from a fresh, unopened container and you will greatly reduced the chances of this type of failure.
I wonder the same thing. Of course, there are other times when I take something apart and can't get it back together that I realize sometimes normal people don't have it so bad.
Good article with a clear thorough explanation of the mechanisms. As I was reading, I mentally concluded that the actuator simply needed a stronger, more robust "return" spring. I wouldn't have continued into the internal cylinder and discovered the corrosion! Good work - Very thorough.
Good job on supplying the detail of surge brake operation. You would not normally expect to see corrosion inside the master cylinder which isctypically a sealed environment. Good article.
Good job troubleshooting and repairing the problem! I never fully understood the operation of surge brakes, but I have a good understanding now.
Every time I end up delving into an odd situation like this and finding a solution, I always wonder to myself "What do normal people do when things like this happen?" :)
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
