These CSA rovers are a long way past "proof of concept." The concept(s) has(have) already been proven by Curiosity. These are correctly named prototypes, but they're not production prototypes, the type ervin007 apparently is thinking of; they're R&D/engineering prototypes, to test different designs and paths to achieving the same goals. CSA joint tests them with NASA, just like they did the Canadarms, and NASA has the means to put these on the moon, on Mars or in space.
The swarm of small RC autonomous robots have advantages of:
1) 50% or more of each bot is common, making the engineering and manufacturing easier
1a) use a low-power MPU (rad-hard, of course). Main power would be motors
1b) common to the chassis: motor, battery, radio/gps, charging, wheels, etc.
1c) there would be a common method of attaching the instrument package mechanically and electrically
2) terrain: base them on the RC cars that don't care about terrain - they can 4-wheel all they want. Obviously, the instrument packages would need to be robust, but we are dealing with fairly light-weight here in a 0.3G environment
Also see the Flee and the small bots at Boston Dynamics.
Some bots would be "refueling", ie go up to another bot and charge it up. They may be heavier than an instrument, so they can service several
Considering the Bouncy Ball delivery system did roughly a ton, and the "drop and pray" did two tons, they can deliver quite a load.
Assume each mini-rover is 20 lb. 100 would be 2000 or one ton. put the mother ship at another ton. That would work.
Also, by having a common body/chassis, the manufacturing is simpler.
I suspect the NIH factor at all levels - NASA is really prone to this. They tend to think in Big Things.
There would need to be a parallel project to put GPS satellites in orbit for the Mother and bots to track each other, plus communications to bounce a signal over the horizon (ie can use very low-power transceivers).
I was in Winslow for the nigh, so it was early the next morning, so traffic was very light. Peaceful. Easy. Feeling good because I was on the way home and my truck was running good (after the fuel pump failed in the middle of the Mojave).
Since I went thru the area the night before, it was dark and I missed stopping at Meteor City - something that only people driving past will ever see. They advertise as having the longest RT 66 map. Cool building...
I like the idea of small robots and swarms. Its a very nice idea. The issue would be weight. The smaller they get the more systems will be repeated from one unit to another. Also each unit will have its own protective shell, battery, charging system, motor system, guidance system, central processor. and while all these things have become relatively cheap and small it will still be difficult since they will add up from one unit to anothre. also the terrain is undefined, environment is undefined, etc.
I try to govern my thoughts & comments, to allow unconventional concepts to sink-in ,,,, you know, "There's no such thing as a Stupid Comment" ,,,, and really consider the intent before passing judgment. But even after pondering, these slides, I don't endorse them as viable. Slide 1 is prone to getting stuck in a small ditch. Slide2 is a dune buggy. Slide 3 carries 500 pounds but has no arms to pick anything up? The concepts get a little more stable in the subsequent slides, but overall, they don't seem to be well conceived.
mr_bandit, that sounds like an interesting alternative approach. I wonder if a) NASA and/or CSA have already considered and rejected this "client-server"-like model of lunar and Mars rovers, or b) that's something they haven't thought of. I wouldn't be surprised if the answer is a) and they rejected it based on the much higher cost of shipping all that stuff. (BTW, did you see "a girl my lord in a flat bed Ford"?)
about the need to look in the caves of Mars (sounds like a Dr Who episode..) for evidence of life.
Dr Boston explores extreme environments for extremophiles - she goes into caves with an environment of pH 1 (the suits start failing immediately; working time is about 45 minutes). There is a multitude of life in these environments.
Point is: find likely caves on Mars and send in 1000 small rovers. Some would drop repeaters on the way in. Some would be power sources. Some would deploy cables for dropping down. Don't worry about getting them back.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
