Yes, if your client is "results driven", it allows a lot of freedom. I use the metaphor of the carpenter's hammer if people question the tools I use. "Are you concerned that the roof lasts 30 years and doesn't leak, or are you concerned that the hammer was a Stanley -vs- a Craftsman?"
I agree Jim - that is a definite advantage to me also. I can choose the tools of my trade when I go that route - I don't have to try to convince management to buy a particular software package for example. I used to do contract work writing test and measurement software for hardware test systems and often the customer just wanted a turn key system - they didn't care how I arrived at the final product as long as it could test to their specifications and meet their budget. It was really nice to use my own stuff that I was already very familiar with - often I could write lots of preliminary code in demo mode at home and then bring it on site to connect to the HW for debug.
My situation is a mirror-image of most of the scenarios posted; being an independent product design consultant, I have all of my own equipment and I either carry it to a client job site or I work remotely on client business in my home office. So, while all the equipment I use is of my own choosing, its the cost of doing business. Pros & Cons; You get what you want, but your pay for it.
Interesting timing on this article. There was a discussion at my company about this very issue. IT (and maybe Legal?) won't allow it for fear that company documents will be available on non-company-controlled devices and so can "disappear" when the person moves on.
For those concerned about privacy (and I'm thinking about those looking for their next career move rather than nefarious activity), I would be concerned that if the company needed to have specific software on your personal device for security purposes, that they would still have the ability to check. It would just be more difficult for the user to mentally disconnect.
The biggest problem I've seen with company owned devices is for those caught in a downsizing. I knew a number of individuals who given their walking papers and asked for their phone...with all their business contacts who could help in their new job search.
Ouch - Sorry that happened! Good point. Since you were at home using your own shop equipment, I bet you wouldn't be covered if you hurt yourself either. Sometimes the quickest solution is not always the best...probably not a big issue with test and measurement equipment but then I could also see someone not trained trying to use something of mine and frying it...hmmm...
I have my own machine shop at home, which I have used for my day job. I thought it was a fair trade to go home early and make parts in my shop.
That was until one day, I ran my mill outside its work envelope. I immediately destroyed my servo motors and drivers. That was two months ago. I just received parts to fix it. It's going to cost me quite a bit to get back up to speed in both time and cash.
So, it is not always beneficial to use your own equipment on the job.
I found your comment "I even use my own oscilloscope, data logger, and soldering station. Times are changing. The consumer world and the corporate business structure are inevitably merging" interesting - I agree, the trend is not limited to Smart devices. I can't count the number of times I have used my own equipment because I didn't want to wait the week it would take for the P.O. to get approved or it was a one shot deal and so rather than incur the expense on the company when I already owned the needed equipment, I used my own o'scope, or function generator, or soldering iron, or whatever...
I agree with your point that it is very challenging now to separate one's personal life from one's employment existance. As we carry our computer devices around when we travel, time is spent doing both work and personal business on the same device. One of my co-worker solves this problem by carrying around one smart phone for work and one smart phone for personal business (which can be cumbersome).
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is