You can see cam follower mechanism for clean energy cheaper than coal. My cam follower mechanism is different than today's cam follower. In general cam follower system,
cam shaft is rotated and follower move up and down according to cam profile. In my cam follower system, 1. Follower is offset. 2. Force is applied from follower to cam and by using this force cam is rotated. 3. We can decide how much follower come down for helping cam to rotate particular circumference length. 4. Follower down 6 cm with 100 kg and rotate cam of 27 cm at 70 kg. 5. Input energy we use to move follower is =0.06*100 =6 N-Meter 6 Out put energy we get on cam = 0.27*70 = 18.9 N-Meter
You can find exact drawing, prototype and description at
Transfers the control of a large number of motion axes from one numerical control kernel to another within a CNC system, using multiple NCKs, and enables implement control schemes for virtually any type of machine tool.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.