Agreed. These types of advances will also help compliance to environmental requirements such as RoHS and others. Good to see reseach and development being performed in this area to give designers more options.
As a manufacturer of aluminum connectors for harsh environments the subject of what coating to use for corrosionprotection is a constant. Especially today with RoHS and REACH activities. Needless to say I am imensely interested and was hoping you can provide contact information for Chidambaram or a path to learn more?
Thanks, Dave, for the summary and all those links. Performance is often the main issue with environmentally friendly substitutes, whether it's coatings or fuel, that are candidates for replacing toxic ones. This one sounds like it's pretty close.
Good discussions. Non-toxic alternatives to chromate coatings of aluminum can move us closer to the overall environmental objectives of such programs as RoHS. Looking at overall lifecycle costs is important when considering a process change as you noted. Chromates consume resources in the disposal of spent coating residues.
TJ, I mentioned those specific alloys because the sources did, as the coating was developed specifically for mil/aero applications. But they also stated that this coating works on "all aluminum products." That sounds like all aluminum alloys.
@TJ McDermott: The same thing that makes 7075 and 2024 so much stronger than other aluminum alloys also makes them less resistant to corrosion: copper. The copper-containing intermetallic particles that are responsible for these alloys' high strength create tiny galvanic cells within the material itself.
In general, if you can protect 7075 and 2024 against corrosion, 6061 will be easy.
Chuck, I wish we could get more cost info on some of these new technologies. As usual, not much is known yet until it's in use in industrial quantities. OTOH, the fact that it's non-toxic may be worth a cost differential.
@Ann: Thanks for a good article on a timely topic. It would be interesting to see polarization curves and salt spray testing results for the molybdate coatings.
There is a wide variety of non-chromate conversion coatings, including permanganates, zirconates, titanates, cerates, and others. There are also conversion coatings based on trivalent chromium. Some of these have been around for many years, while others are newer. However, to the best of my knowledge, none of them provide corrosion resistance that is quite as good as that of hexavalent chromate.
Electrodeposited coatings can meet or exceed the performance of chromate, but it is challenging to coat internal passages with electrodeposited coatings, and they don't have the self-healing characteristics of conversion coatings.
The U.S. military has a great on-line database with information about alternatives to chromate conversion coatings.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
