As Mydesign asked earlier, what's the cost? Fuel cost is an airline's biggest expense. How much will these biofuels save them? If there's no savings, there's no way they will adopt its use. I hope taxpayers won't have to subsidise this like the current $2.21/gal hidden tax we're getting stuck with using ethenol blends in our cars.
Nice article, Ann. This test flight is good news no matter where the biofuel comes from. It's a step is a positive direction. Different crop growers will experiment with crops that match efficiency and regulation as they move on and expand biofuels programs.
Lou, thanks for the clarification. The fact that not all semi-arid areas are found between those two Tropics plus the fact that wild mustard grows in semi-arid areas in the SF Bay Area tells us that the plant family can grow wild outside of the "tropics" as you've defined them. Even more likely when engineered by humans in one way or another. Maize (corn) is a perfect example: it began as a radically different plant in Mexico and several hundreds of years later was cultivated in astonishing variety all the way from the tropics to the Northern Plains. So I'm not sure why you conclude that this plant is not suited to the Canadian climate.
Ann, thanks for the clarfiication. By tropic I mean the area between the Tropic of Cancer and the Tropic of Capricorn, not necessarily a wet area. This is where a lot of, but not all, of the type of land that might be useful for this crop. It still doen not correspond with any area of Canada, which is interesting. They have plenty of oil and lots of land. I would have thought they would be looking at crops appropriate to their climate.
Mydesign, specific prices were not mentioned, but the fact that this is a crop being grown industrially in large quantities bodes well. Applied Research Associates says the ReadiJet fuel is "low cost" due to the catalytic hydrothermolysis process, http://www.ara.com/fuels/CH-Technology-Status.html which "provides a net cost savings compared to straight hydrotreating and hydrocracking processes. The cost savings result from the reduction of hydrogen and catalyst cost consumption and the production of high-value chemicals." To me, what's most important is the fact that this fuel's performance is good enough to work unblended.
Lou, it's not tropical areas where these Brassica plants and their relatives grow, which would be much too moist, but arid and semi-arid regions, many of which are near the equator. Brassica carinata, the one described in the article, is also called Ethiopian mustard, for instance. A variety of wild mustard even grows in the foothills of the San Francisco Bay Area every spring on very poor, dry, non-irrigated soil used for horse and cattle pastures. The point is, it does not compete with agricultural crops, which aren't grown, or likely to be grown, on the same poor soil where the Brassica grows. There are several species with these characteristics being considered or used for biofuel.
Ann, I find it interesting that Canada is looking at these crops. They generally only grow in tropical, or semi-tropical, regions. One that I am familiar with is jatropha. While it is being used, and is touted as a plant that can be turned into aviation fuel, its impact is very small.
Another issue with any crop that is grown on land is that, although the crop is not a food crop, it can compete with food crops for land. Algae and seaweed do not have this problem.
Ann, aviation fuels are the purest form of crude oil with a higher cost. So any alternate to crude oil based aviation fuel will have a greater impact on aviation sector. What about the cost factor?, if cost is less than crude oil, then obliviously it will helpful for the low cost carriers.
Industrial trade shows, like Design News' upcoming Pacific Design & Manufacturing, deserve proper planning in order to truly get the most out of them as marketing tools. Here's how to plan effectively.
The series now can interface with a wider array of EtherNet/IP-compliant hardware across many industrial sectors, including factory automation systems, plastic injection molding apparatus, and materials-handling equipment.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.