Whenever a solid state component is available it will generally be superior to an electromechanical one in most modern applications. I ran into this years ago with amplifiers for communications for satellites. Typically klystron tubes were used. Advances in solid state amplifiers allowed the replacement of these in many cases. They were more reliable, lighter and used less power. I see the same thing with this class of relay. They also, as is pointed out, avoid some of the pitfalls of electromechanical relays. There was an article in Design News about a problem with such a relay recently.
I couldn't agree with you more, naperlou. Solid state is the way to go whenever is makes sense, as far as I'm concerned. In noise sensitive data aquisition matters, electromechanical relays can introduce unwanted noise into a system. These kinds of optical relay technology has many uses. Of course the obious power savings is a plus as is the reliability factor.
akwaman, Nicely explained, I agree totally with all the points you've made. I wanted to use SSRs(solid state relays) in wireless Hunter Fan Ceiling Controls but management was against it because of cost. As you discussed in your post, yes the intial cost investment is somewhat pricey but the ROI would have been substantial in terms of reduced customer warranty claims due to failing electromechanical relays. I'm definitely will be sharing this article with my Control Systems class at ITT Tech.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
