akwaman, Nicely explained, I agree totally with all the points you've made. I wanted to use SSRs(solid state relays) in wireless Hunter Fan Ceiling Controls but management was against it because of cost. As you discussed in your post, yes the intial cost investment is somewhat pricey but the ROI would have been substantial in terms of reduced customer warranty claims due to failing electromechanical relays. I'm definitely will be sharing this article with my Control Systems class at ITT Tech.
I couldn't agree with you more, naperlou. Solid state is the way to go whenever is makes sense, as far as I'm concerned. In noise sensitive data aquisition matters, electromechanical relays can introduce unwanted noise into a system. These kinds of optical relay technology has many uses. Of course the obious power savings is a plus as is the reliability factor.
Whenever a solid state component is available it will generally be superior to an electromechanical one in most modern applications. I ran into this years ago with amplifiers for communications for satellites. Typically klystron tubes were used. Advances in solid state amplifiers allowed the replacement of these in many cases. They were more reliable, lighter and used less power. I see the same thing with this class of relay. They also, as is pointed out, avoid some of the pitfalls of electromechanical relays. There was an article in Design News about a problem with such a relay recently.
The 100% solar-powered airplane Solar Impulse 2 is prepping for its upcoming flight, becoming the first plane to fly around the world without using fuel. It's able to do so because of above-average performance by all of the technologies that go into it, especially materials.
With major product releases coming from big names like Sony, Microsoft, and Samsung, and big investments by companies like Facebook, 2015 could be the year that virtual reality (VR) and augmented reality (AR) finally pop. Here's take a look back at some of the technologies that got us here (for better and worse).
Good engineering designs are those that work in the real world; bad designs are those that don’t. If we agree to set our egos aside and let the real world be our guide, we can resolve nearly any disagreement.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.