HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Comments
View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 4/4
notarboca
User Rank
Gold
Re: Making it work
notarboca   10/31/2012 11:52:42 PM
NO RATINGS
Even with a good statement of work, I asked the manufacturing staff for "as built" drawings to try to catch things like this.  Wouldn't have had an effect on the magnet glue problem, though.

jmiller
User Rank
Platinum
Re: Making it work
jmiller   10/31/2012 10:23:06 PM
NO RATINGS
I agree with the use of good instructions or standard operating procedures.  However, I don't like the idea of standard operating procedures being, "bring it to me and I'll fix it with some baling wire and twine."

jmiller
User Rank
Platinum
Re: Making it work
jmiller   10/31/2012 10:21:22 PM
NO RATINGS
I liked the article as well.  Kind of makes one wonder if the tolerance stack was done to understand if the process was capable of producing repeatable parts with the process being used.

jmiller
User Rank
Platinum
Re: Making it work
jmiller   10/31/2012 10:16:29 PM
NO RATINGS
And in this case it sounds like someone forgot to check and see if the glue would give the product the life it needed.  Could have been one of those cost out ideas.  Or more than likely, someone just thought it would work as good as the other stuff.

Tim
User Rank
Platinum
Re: Making it work
Tim   10/31/2012 8:06:38 PM
NO RATINGS
This story exemplifies the importance of good work instructions. A good system will account for a new employee and still make quality product. Documentation of task steps and quality risks on each step is important.

naperlou
User Rank
Blogger
Re: Making it work
naperlou   10/31/2012 11:01:46 AM
NO RATINGS
Scott, that is a good point.  This reminds me of a number of situations I have seen with small manufacturers over the past few years.  The problem was parts testing over time (life testing).  You really need to trust your supplier or have a good warranty program.  On the other hand, even with a good warranty the failure often leaves a bad taste with the consumer. 

tekochip
User Rank
Platinum
Odd Failure
tekochip   10/31/2012 10:55:34 AM
NO RATINGS
I spent a lot of years as a club musician and speakers were tossed around quite a bit, not like Pete Townsend, but things get dropped, bounced around on the stage, and in vans.  I've heard voice coils rub, seen them melt, and shatter (titanium horns).  I've seen surround dry rot and fatigue, but I've never seen a magnet fall off, not even on the big 20lb magnet JBLs.  This sounds like a pretty low quality vendor.


Scott Orlosky
User Rank
Platinum
Making it work
Scott Orlosky   10/31/2012 10:09:26 AM
NO RATINGS
I really enjoyed this story since it addresses the real world issues of manufacturing.  It's fine to design something on a CAD program, but somewhere along the line, the actual parts have to be assembled and that, it turns out, is every bit as important and the design itself.  Attention to detail, proper assembly techniques, training and clear work instructions all matter.  Thanks.

<<  <  Page 4/4


Partner Zone
Latest Analysis
A Frost & Sullivan study finds that increased cyber attacks are prompting a flurry of innovative protection tools.
Devices and interconnected systems are finding a foothold not only in our homes but in mainstream organizations. Here are three tips to mitigate the risk.
What makes this movie stand out from the typical high school sports story is that the teenagers are undocumented immigrants, and the big game is a NASA-sponsored marine robotics competition. Like many other Hollywood movies, however, Spare Parts only tells part of the story. What the film shows -- and doesn’t show -- raises important issues affecting STEM education in the US.
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Load dump occurs when a discharged battery is disconnected while the alternator is generating current and other loads remain on the alternator circuit. If left alone, the electrical spikes and transients will be transmitted along the power line, leading to malfunctions in individual electronics/sensors or permanent damage to the vehicle’s electronic system. Bottom line: An uncontrolled load dump threatens the overall safety and reliability of the vehicle.
More:Blogs|News
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service