HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 3/3
JimT@Future-Product-Innovations
User Rank
Blogger
First lesson in Engineering Economics
JimT@Future-Product-Innovations   10/29/2012 6:48:01 PM
NO RATINGS
When I was just a toddler, Lego Blocks let my imagination turn into enormous creations.  But I remember something of a very specific value, quite a few years later.  I was 16 and landed a job as a Detail Draftsman at a Detroit Tool & Die shop, a job obtained thru the High School Co-Op program.  A 5-ton cylindrical hub-cap die was crushing the part with a small interference.  I attempted the corrective action by reducing the Inside diameter of the tool member by ½ inch.  When the shop owner saw my attempt, he showed me that the entire I.D. didn't need reducing; only about .050" at the face needed relieving.  He explained that while the full I.D. could have been reduced for the clearance it would have taken 25x longer in lathe work to reduce the diameter, instead of simply "facing" the small, local depression.  He put his hand on my shoulder and informed me that machine time costs money! My first lesson in Engineering Economics.

notarboca
User Rank
Gold
Re: Engineering Story
notarboca   10/29/2012 3:38:15 PM
NO RATINGS
Tube testing at the drugstore for our first color TV (1969).  We watched the Moonshot on that TV.  I later helped my Dad change the picture tube on that Zenith console.  Matter of fact, I took the TV to college and used it right up until I wanted something better (1986).  Oh yes, and pulling the crystal/mechanical tuner and cleaning all the contacts.  My Dad was an Aviation Electronics man in the Navy; I had a great time growing up and fixing/modifying electronics.

Tim
User Rank
Platinum
Re: hide the phillips
Tim   10/29/2012 3:14:50 PM
NO RATINGS
My dad hid all of the 9/16"wrenches and sockets, so I would stop taking my bike apart. It worked until I found his set of slip joint pliers.

gsmith120
User Rank
Platinum
Re: Early Electronics Kits
gsmith120   10/29/2012 12:55:35 PM
NO RATINGS
I only discovered fun with electronics while in community college.  My first project was a Light Beam Communicator, think it was a Heath-Kit.  It was a lot of fun to build, my soldering skills... well not the best but I got the job done.  While Daddy wasn't an engineer he know a lot and was really good at electronics and fixing stuff.  However, in our house the girls were mostly taught "lady like things" by Mommy and my brother was taught "manly things" by Daddy.  Guess Daddy may have been surprised to get a girl that's an electrical engineer.  Surprised me too. lol

richnass
User Rank
Blogger
Re: hide the phillips
richnass   10/29/2012 11:43:12 AM
NO RATINGS
NadineJ: I can appreciate your story. I was always really good at taking stuff apart, but not as good at (or maybe not as interested in) putting stuff back together. Now, thanks to our Tear Down articles, I actually get paid to take stuff apart. And it usually gets returned in a ziplock bag.

NadineJ
User Rank
Platinum
hide the phillips
NadineJ   10/29/2012 11:07:42 AM
NO RATINGS
In the earliest stories, my family jokes about having to hide screwdrivers when I was around.  I had a habit of screwing the backs off of any electronic device to look inside.  I don't remember that but I'm sure it's true.

When my dad built his own digital clock, I didn't leave his side all summer.  I HAD to learn how to do that too.  Best summer ever...

Jack Rupert, PE
User Rank
Platinum
Early Electronics Kits
Jack Rupert, PE   10/29/2012 10:57:45 AM
NO RATINGS
I had a little electronics kit that was essentially a large bread board with a handful of components.  It came with a book of a whole bunch of circuits to build and showed both the schematic and the "wiring diagram".  The quality left something to be desired, especially the potenitometers, which needed to be assembled from cheaper componets.  Later, I upgraded to a much better kit.

Tim
User Rank
Platinum
Engineering Story
Tim   10/29/2012 10:51:26 AM
NO RATINGS
My story is the installation of a toggle switch on a hand-held game to create a mute button for my toy as a kid.  This was my first foray into changing existing technology and using a solder iron.

<<  <  Page 3/3


Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service