HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Comments
View Comments: Newest First|Oldest First|Threaded View
Page 1/3  >  >>
Rob Spiegel
User Rank
Blogger
Re: They can't both be bad
Rob Spiegel   11/1/2012 3:21:04 AM
NO RATINGS
I have teenagers, too, Nancy, so I know what you mean. One of the problems with counterfeiting in China is there doesn't seem to be any negative consequences. The government in China seems to be a buffer between the counterfeiters and their victims.

Nancy Golden
User Rank
Platinum
Re: They can't both be bad
Nancy Golden   10/31/2012 5:54:49 PM
NO RATINGS
You are so right Rob - I face that with my teenagers everyday! We always follow through with consequences because if we don't, they think that they can still get what they want even though they knowingly broke the rules. It's just easier to apply that to your kids than to a whole country!

Rob Spiegel
User Rank
Blogger
Re: They can't both be bad
Rob Spiegel   10/31/2012 5:34:12 PM
NO RATINGS
Nancy, I think part of the problem with counterfeiting is that we tend to do what we get rewarded for. If those doing the counterfeiting are not facing any negative impact, they'll keep doing it.

Nancy Golden
User Rank
Platinum
Re: They can't both be bad
Nancy Golden   10/31/2012 12:52:20 PM
NO RATINGS
Oh, I agree Rob. You have to draw a line at some point. There is even an ethical system called ethical egoism which says that selfishness should not be feared but rather embraced as the highest principle of morality. But just because someone subscribes to a certain ethical system, it doesn't mean that it is an acceptable system. Counterfeiting is such a gross violation of standard business practice - and if they expect to participate in the global economy, they should recognize standard business practices...but another issue that is part of our global economy is that we are all coming from different worldviews. It is a challenge to be sure!

Rob Spiegel
User Rank
Blogger
Re: They can't both be bad
Rob Spiegel   10/31/2012 12:42:59 PM
NO RATINGS
Good point, Nancy. When it comes to counterfeiting, I would think they must know they're violating standard business practices. 

Nancy Golden
User Rank
Platinum
Re: They can't both be bad
Nancy Golden   10/31/2012 12:31:05 PM
NO RATINGS
Yes, Rob - and when it is an ingrained mindset it is really hard to change. There are so many ethical systems and when doing business with folks who don't subscribe to the same ethical standards - people call foul on one side while the other side is scratching their heads thinking, but we aren't doing anything wrong...

Rob Spiegel
User Rank
Blogger
Re: They can't both be bad
Rob Spiegel   10/31/2012 7:03:40 AM
NO RATINGS
That's an interesting story, Bob. And it certainly illustrates a culture that is far different from the business culture in the U.S. We would replace all of the workers if we could. 

Rob Spiegel
User Rank
Blogger
Re: They can't both be bad
Rob Spiegel   10/31/2012 7:00:17 AM
NO RATINGS
I hadn't thought about it that way, Nancy. But you're right this is a version of the ends justifying the means. 

Thinking_J
User Rank
Platinum
Trouble shooting..
Thinking_J   10/29/2012 4:32:26 PM
NO RATINGS
A good story....

Trouble shooting a problem in any complex product isn't always straight forward.

I have had hundreds of product returned because it didn't work like the prior production build lot... Only to find out what was assumed to be the "same"... wasn't. In this case, the customer incorrectly documented the cables required - and fooled themselves during the course of swapping things around, into thinking the only item changing was the interface board we shipped to them. The problem was the cables they built.. and had their end users build (incorrectly) in hundreds of airports across the world!

Simply put.. they thought the only thing they were swapping out was the interface card we were providing. They were certain this was the only thing being done.

It required a third party to discover the real cause (we didn't have examples of "their" bad cables).

Any single level failure is generally easy to fix with swapping out components with known good components.

But if that is your only skill set during trouble shooting, YOU are in trouble.

Your trouble shooting skills are really "put to the test"? ... when fixing a system with 2 or more different failures at the same time. No one component swap out will "fix" the system.

And a variation of this scenario   .. swapping components from questionable stock (never assume "new" = good/working)

This issue is not directly related to Nationality or even counterfeit components. I have seen bad "new" components from nearly all countries / companies on occasion. Counterfeit parts (aircraft industry) happen in the USA all the time. And corrupt business leaders happen everywhere. Little value in making sweeping generalizations on the subject.

Having the skill to not to depend on assumptions.. is the real lesson being presented.

Tim
User Rank
Platinum
Re: They can't both be bad
Tim   10/25/2012 7:36:30 PM
NO RATINGS
Your story reminds me of a recent trip to China where I went to a KFC for dinner.  At the completion of my meal, I picked up my tray to discard my trash, and a KFC employee agressively approached me telling me something that I did not understand.  My interpreter explained to me that the employee was telling me that I was trying to take her job, and clearing tables was only her responsibility.  It is a different culture.

Page 1/3  >  >>


Partner Zone
Latest Analysis
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
When my daughter decided she wanted to study engineering, I was very proud of her. At the same time, in the back of my mind, I wondered if she knew what she was in for.
AutoDesk has teamed up with 3D scanner provider Artec to link CAD software and 3D scanners to make it faster and easier to create accurate 3D mesh models for printing or digital use.
Last year you helped Design News and Allied Electronics crown its first-ever Gadget Freak of the Year, and we need your help again. Vote in round 2 of our second-annual contest.
More:Blogs|News
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Dec 1 - 5, An Introduction to Embedded Software Architecture and Design
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service