Bill, I haven't used a Hall device is series for measureing current. I asked the question about series resistance because that application was mentioned during the slides on using Hall devices with a fixed magnetic field present.
rswanson: I have used Allegro ACS713 series devices that include the current conduction (metal bar) path internally in the IC for super ease of use and I believe much more accuracy. It's series resistance spec is about 1.2mOHM
Hydrogent--the answer is the usual: it depends. It depends on the distance, oritentation, etc. But remember--a toroidal coil is (in theory) ontl affected by the field within, not outside of the toroid.
Suzie--I will look for sources on higher current--but usually the transducer vendors have very good app notes. And there are also regualtory standards which you don;t have to follow, but may be worth a look at.
It appears that the answers go only back to the ouestion submitter. That is a disappointment as it would be possible to learn if we all could see the responses. This feature and yeaterday's troubles make this course of much less value than it could have been.
One question that I have concerning shunts. We have various values of bar shunts here at our lab that we use for measuring current levels from 10a to 5000a. Is it necessary to actually prove the resistive value at various temperature due to self-heating, or is it acceptable to use thermal coefficients from the manufacturer? Also, in dealing with the high current, it is also important on the physical connections and orientation of the connections. Do you have any good sources of information on this topic?
One thing I've encounter quite often with Hall Effect sensors used in the AC/DC type current probes you mentioned is the DC zero value is often drifting/shifting. You must have a means of nulling the "zero" point.
Earlier this year paralyzed IndyCar drive Sam Schmidt did the seemingly impossible -- opening the qualifying rounds at Indy by driving a modified Corvette C7 Stingray around the Indianapolis Motor Speedway.
Wearables are changing the way we see ourselves. With onboard sensors that have access to our bodies, we are starting to know our physical selves like never before, quantifying our activity, our heart rate, breathing, and even our muscle effort.
Last week, the bill for reforming chemical regulation, the TSCA Modernization Act of 2015, passed the House. If it or a similar bill becomes law, the effects on cost and availability of adhesives and plastics incorporating these substances are not yet clear.
This year, Design News is getting a head start on the Fourth of July celebration. In honor of our country and its legacy of engineering innovation -- in all of its forms -- we are taking you on an alphabetical tour through all 50 states to showcase interesting engineering breakthroughs and historically significant events.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.