HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Rob Spiegel
User Rank
Blogger
Re: Working with what you have
Rob Spiegel   10/24/2012 5:00:31 AM
NO RATINGS
Sounds like the cost of a repair would pay for itself, TJ. As for sounds in plants, I've heard some complaints from baby boomer plant managers who say that the young engineers coming into the workforce rely too much on computer technology and they're not learning to tell the health of the plant by sound and vibration.

TJ McDermott
User Rank
Blogger
Re: Working with what you have
TJ McDermott   10/24/2012 12:47:45 AM
NO RATINGS
The solution can be as easy as some pipe sealant paste or tape, or repairing/replacing a cracked hose.  A single 1-mm air leak can cost $200 / year (based on calculations found on the net).  One leak may not sound like much, but even a small plant will have multiple leaks. Just 5 is a $1000 per year, and that is if they're as small as 1 mm.

 

Rob Spiegel
User Rank
Blogger
Re: Working with what you have
Rob Spiegel   10/24/2012 12:37:24 AM
NO RATINGS
Seems like this is a problem that could be fixed without getting fancy, TJ. But again, I may be mistaken. Is the solution more expensive than the inefficiencies of the problem?

TJ McDermott
User Rank
Blogger
Re: Working with what you have
TJ McDermott   10/23/2012 12:36:37 AM
NO RATINGS
Walk through a plant off-shift, or third shift, and listen to the not-silence.  Big factories, small mom-and-pop operations, it doesn't matter.

 

Rob Spiegel
User Rank
Blogger
Re: Working with what you have
Rob Spiegel   10/22/2012 8:36:38 PM
NO RATINGS
TJ, I wasn under the impression this area of plant inefficiency -- leaks -- was showing some real improvement. Perhaps I'm mistaken.

Charles Murray
User Rank
Blogger
Re: Working with what you have
Charles Murray   10/18/2012 5:29:33 PM
NO RATINGS
Pneumatic component suppliers are painfully aware of the leak issue, TJ. But while they've improved on the problem, they still haven't eliminated it, even after many years of trying.

TJ McDermott
User Rank
Blogger
Working with what you have
TJ McDermott   10/18/2012 10:19:43 AM
NO RATINGS
With regard to pneumatic systems, the single largest cost in any plant is - LEAKS.  Walk through any plant, paying attention to your ears.  You will hear, EVERYWHERE, the hiss of leaking compressed air.  That sound is money being literally thrown away.

If one wants to save energy, reduce consumption, then the leaks must be found and fixed.  Only after the plant floor stops hissing would optimizing the pneumatic system for efficiency make sense.

It's analogous to proper tire pressure and fuel economy.  Keeping tires properly inflated is probably the simplest way to improve fuel economy, but is the most ignored.



Partner Zone
Latest Analysis
Because of the increasing ubiquity of wearable technology, it would be easy to think that design of wearable devices is routine and involves common design and engineering knowledge. Missed efforts in development will be remembered once the devices are used in the field
This grab-bag of new fasteners and adhesives work with a range of materials they can attach to, as well as a wide variety of applications. Several are for use in consumer applications, such as wearables or other compact electronic assemblies, and some of the adhesives have extended service temperature ranges and cure at room temperature.
Finalists have been announced for the annual Medical Design Excellence Awards (MDEAs), recognizing the best achievements in medical device design and engineering.
As governments, associations, and NGOs around the world seek to protect consumers, national and regional standards are becoming mandatory, challenging manufacturers and making testing and certification necessary for any product developed and brought to market.
No, we're not having delusions of grandeur -- this is the weapon of a Jedi Knight. And we're dying to see how it works. Today, we tear down a lightsaber.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 4 - 8, Designing Low Power Systems using Battery and Energy Harvesting Energy Sources
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service