HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Rob Spiegel
User Rank
Blogger
Re: Working with what you have
Rob Spiegel   10/24/2012 5:00:31 AM
NO RATINGS
Sounds like the cost of a repair would pay for itself, TJ. As for sounds in plants, I've heard some complaints from baby boomer plant managers who say that the young engineers coming into the workforce rely too much on computer technology and they're not learning to tell the health of the plant by sound and vibration.

TJ McDermott
User Rank
Blogger
Re: Working with what you have
TJ McDermott   10/24/2012 12:47:45 AM
NO RATINGS
The solution can be as easy as some pipe sealant paste or tape, or repairing/replacing a cracked hose.  A single 1-mm air leak can cost $200 / year (based on calculations found on the net).  One leak may not sound like much, but even a small plant will have multiple leaks. Just 5 is a $1000 per year, and that is if they're as small as 1 mm.

 

Rob Spiegel
User Rank
Blogger
Re: Working with what you have
Rob Spiegel   10/24/2012 12:37:24 AM
NO RATINGS
Seems like this is a problem that could be fixed without getting fancy, TJ. But again, I may be mistaken. Is the solution more expensive than the inefficiencies of the problem?

TJ McDermott
User Rank
Blogger
Re: Working with what you have
TJ McDermott   10/23/2012 12:36:37 AM
NO RATINGS
Walk through a plant off-shift, or third shift, and listen to the not-silence.  Big factories, small mom-and-pop operations, it doesn't matter.

 

Rob Spiegel
User Rank
Blogger
Re: Working with what you have
Rob Spiegel   10/22/2012 8:36:38 PM
NO RATINGS
TJ, I wasn under the impression this area of plant inefficiency -- leaks -- was showing some real improvement. Perhaps I'm mistaken.

Charles Murray
User Rank
Blogger
Re: Working with what you have
Charles Murray   10/18/2012 5:29:33 PM
NO RATINGS
Pneumatic component suppliers are painfully aware of the leak issue, TJ. But while they've improved on the problem, they still haven't eliminated it, even after many years of trying.

TJ McDermott
User Rank
Blogger
Working with what you have
TJ McDermott   10/18/2012 10:19:43 AM
NO RATINGS
With regard to pneumatic systems, the single largest cost in any plant is - LEAKS.  Walk through any plant, paying attention to your ears.  You will hear, EVERYWHERE, the hiss of leaking compressed air.  That sound is money being literally thrown away.

If one wants to save energy, reduce consumption, then the leaks must be found and fixed.  Only after the plant floor stops hissing would optimizing the pneumatic system for efficiency make sense.

It's analogous to proper tire pressure and fuel economy.  Keeping tires properly inflated is probably the simplest way to improve fuel economy, but is the most ignored.



Partner Zone
Latest Analysis
Do you long for the days of retro video gaming? Here's how you can turn an old PC into an old-school arcade cabinet with only $100 and a bit of woodwork.
A Vienna, Austria-based startup called Heliofloat has designed a platform of solar panels that can be deployed in lakes or oceans to generate solar-based electricity.
Electrical engineers from the University of Washington and Delft University of Technology have developed a new type of sensor-based platform that harvests energy from radio waves for electricity.
A simple new chemical method for repairing and recycling notoriously difficult carbon fiber composites has been developed by the Fraunhofer Institute for Applied Polymer Research. An entire component can be completely recycled, including reclaiming its expensive carbon fibers for reuse.
In today’s connected world we are seeing the beginning of connected homes, smart grids, self-driving automobiles, drones, and many other amazing devices. Out of all the soon-to-be connected devices, which device poses the greatest dangerous to its users and society?
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 2 - 6, Embedded System Design Techniques™ - Rapid Prototyping Embedded Systems using Micro Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service