HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
apresher
User Rank
Blogger
Extension of Ethernet Network
apresher   10/23/2012 5:52:41 PM
NO RATINGS
Chuck, I am not sure about the development history of IO-Link. Clearly it was motivated by the need for an inexpensive way to easily set dconfiguration parameters, monitor systems and do troubleshooting of inexpensive devices linked to a fieldbus network.  Automation suppliers have widely embraced it for all of those reasons.  The overhead and expense of adding Ethernet to these simpler devices, such as sensors, plus the openness of the technology has also played a key role in its gaining support.  

Jack Rupert, PE
User Rank
Platinum
Re: Extension of Ethernet Network
Jack Rupert, PE   10/23/2012 2:26:41 PM
NO RATINGS
Chuck,  I think the idea was to have a standard type of communication topoology regardless of the bus structure.  Basically, it's due to the many different types of bus out there.

Charles Murray
User Rank
Blogger
Re: Extension of Ethernet Network
Charles Murray   10/17/2012 4:47:52 PM
NO RATINGS
Interesting article, Al. What's the history of IO-Link? Did this grow up in response to Industrial Ethernet, or did it exist in some other form previously?

naperlou
User Rank
Blogger
Re: Extension of Ethernet Network
naperlou   10/17/2012 11:36:18 AM
NO RATINGS
apresher, the important thing is that Ethernet brings a lot of advantages to the industrial environment, while having a different structure than networking protocols that were designed for that environment.  The idea of a two tier approach, with another protocol handling the shorter distance, lower speed aspects of the last foot, is almost inevitable.  With the availability of standardized modules that interface these other bus technologies with Ethernet, a system can be created that easily handles modules with different protocols in the same system.  As long as the programmer can treat these as I/O points on the Ethernet network, then various suppliers can be used without unduly restricting the design.  This is the essence of the systems approach.

apresher
User Rank
Blogger
Extension of Ethernet Network
apresher   10/17/2012 9:41:37 AM
NO RATINGS
Helge, Excellent discussion and analysis. The point is that these technologies can extend networking functionality at low cost the last foot, and provide a way to increase the intelligence of these devices without costs especially for setting parameters, configuration and diagnostics.  Thanks.

Helge Hornis
User Rank
Iron
IO-Link ... a possible solution for "the last foot"
Helge Hornis   10/17/2012 9:30:12 AM
NO RATINGS
It is important to clearly separate IO-Link and whatever Ethernet based protocol a user might select.  While IO-Link adds functionality and diagnostics capability to an "end device" it is still, as was pointed out, a parallel wiring technology and does therefor not simplify installations using Ethernet.  As was pointed out the overhead associated with Ethernet is significant.  This makes it necessary for Ethernet field I/O to have a relatively high I/O count; perhaps 16 or 32 I/O points per module.  IO-Link is not going to change that fact.  Considering applications in material handling or storage and retrieval such a high I/O count results in setting up an Ethernet network PLUS a significant parallel (i.e. hardwired) cabling to the sensors and actuators.  IO-Link or not, the extra material (cordsets, wiring duct ...) needed is still considerable.  In those cases a highly decentralized solutions like AS-Interface offers better functionality, faster installation, reduced material and ultimately lover cost.  And since AS-Interface makes use of a proven installation piercing technology adding low density I/O wherever necessary is possible. It should also be mentioned that AS-Interface does not replace Ethernet. On the contrary, users selecting any Ethernet solution will simply add the appropriate gateway and then collect field I/O through low density/ low cost I/O modules (some are as little as a book of matches.)  From the PLC's point of view a gateway is simply an Ethernet I/O module with hundreds of I/O points.   



Partner Zone
Latest Analysis
Released on September 19, 2014, this 5.5 inch screen iPhone is the larger version of the iPhone 6, whose teardown follows tomorrow.
A Design News course on field programmable gate arrays (FPGAs) should help engineers who are considering the technology for their upcoming designs.
In many engineering workplaces, there’s a generational conflict between recent engineering graduates and older, more experienced engineers. However, a recent study published in the psychology journal Cognition suggests that both may have something to learn from another group: 4 year olds.
CTC releases EtherCAT Master module for high-performance control of networked servos, stepping motors, and I/O devices.
Conventional wisdom holds that MIT, Cal Tech, and Stanford are three of the country’s best undergraduate engineering schools. Unfortunately, when conventional wisdom visits the topic of best engineering schools, it too often leaves out some of the most distinguished programs that don’t happen to offer PhD-level degrees.
More:Blogs|News
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development – A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service