With the photos stacked up like that, it's pretty incredible to see how far the space arm has come in terms of form, functionality, and in particular, size. Specifically, it strikes me as to how large the robotic manipulators are when viewed in the first slide in some sort of facility on earth vs. when they are viewed within the context of the vastness of outer space. Cool slide show.
Beth, while checking out the latest, NG Canadarm, I was looking at all the cool historical space photos. Then I started reading the caption data and realized that Canadarm, in one form or another, had been part of so many key historical events in space. That's how the idea for this slideshow was born.
Ann. Thanks for a great series of photos. Even with all the great engineering that went into this project, nothing beats the visual impact of seeing it in action in space.
Jenn, Lou is right--the arms are designed to work in zero-G environments, and are too heavy to do any lifting in Earth's 1G. "Lightweight" refers to the new NG Small Canadarm, the one that will do repairing and refueling of satellites in space.
The first image of the slide show looks like the arm being tested / demonstrated. I believe the motors that move the arms are actually quite small. If I remember correctly, the arm can't really support itself in a 1-G gravity field.
Are those blue units part of the supporting rig, air-cushion supports that permit the arm to move freely in a horizontal plane?
Ann, The end effector used to grab hardware and spacecraft is not what normally comes to mind when one thinks of "robotic" arms (a typical mechanical gripper). Do you kno how the 3-wire snare used on all of the Canadarms came to be the standard for US space operations?
TJ, the blue supports in the first photo weren't identified. I would think that the answer to your question about the end effector's history is available on the web. The Canadian Space Agency's website is pretty extensive, and there's also this source: http://www.thecanadianencyclopedia.com
Ann, this slide show brings back lots of memories. One of my last aerospace projects was working on the Canadarm2. I was with a company involved with supporting the software used to control the arm. I was at their plant and got to touch one of the shuttle arms while it was being refurbished on the ground. That was back in 1992, by the way.
On thing that was interesting is the genesis of the companies involved. I was doing a project for Spar Aerospace. MacDonald, Dettwiler and Associates Ltd. was a subcontractor we also worked with. Now Spar is part of MacDonald, Dettwiler and Associates Ltd. It is funny how the consolidation in the industry happens.
Lou, thanks for telling us that you worked on one of these projects. I know what you mean about consolidation in aerospace companies. BTW, was the "MacDonald" in MDA from the old MacD-D?
Nice slide show, Ann. Since you have covered tons of stories regarding robotics, I'm curious as to how Canada stacks up against the robotics that are getting developed here in the U.S., particularly by the military. Is Canada a contender?
Rob, I haven't seen any robotics research coming from Canada except for the Canadarm. OTOH, the Canadarm has been a massive, 30-year project commanding a lot of resources and many, many different technologies. It's also been vital to the functioning of both the shuttle and the space station.
Ann, thanks for a great slideshow. It is both amazing and a tribute to all the engineers and technicians that brought this project to fruition. A 30 year run of the basic arm and improvements made during the long deployment make this an exceptional feat. I'm sure the new NGC will be equally impressive.
Rob, the Canadarm was designed to work in a weightless, zero-G environment, as we discussed below regarding Lou's comment. So the only "crossover" apps would be others in space, since the arms are too heavy to operate in Earth's 1G.
That's very interesting, Ann. The physics of space would require completely different materials engineering. I would imagine that requires some very sophisticated simulation and modeling.
Rob, to answer your earlier question, looks like the Canadian Space Agency is also working on lunar and planetary rovers, which I'll be reporting on soon.
Ann, if you mean Mcdonnel Douglas, then the answer is no. One thing that was nice at the MacDonald Dettwiler facility in Vancouver was that Friday's were beer days. At the end of the day everyone would get together in the cafeteria and the beer cooler would be unlocked. There was a great selection of good Canadian beers and we would all have two or three and socialize. It was a lot of fun.
Chuck, I know what you mean. 15 meters is just short of 50 feet. This thing has to grapple with satellites and its predecessor, Canadarm 2 (weighing 2 tons), docked the space shuttle.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
8 
