Dave, corrosion current density values (Icorr) appear several times in different contexts. Without an inhibitor it's 3.47, at 100 ppm it's 2.32, at 500 1.84, at 1500 1.25 and at 2000ppm it's 0.98. Regarding management not taking to the idea of using fruit juice, I think that has more to do with our Western culturally-induced industrial paradigms. People in other areas of the world, usually with a less complex economic infrastructure and greater reliance on local natural resources, take this research and its potential applications seriously. We have much to learn, or re-learn, it seems to me.
@Ann: If you have access to the article, can you tell us what the Icorr is, with and without the coating?
Icorr is the corrosion current (usually measured in mA/cm²), and is directly related to the corrosion rate. For example, if Icorr without the coating is 4 times more than Icorr with the coating, then the coating reduces the corrosion rate by a factor of 4.
In an article released earlier this year, Dr. Gerengi showed that the extract of a certain South American hardwood tree could reduce the corrosion rate of low carbon steel in hydrochloric acid by as much as factor of 3.
While this research into "green" corrosion inhibitors is interesting, the effects documented so far have been relatively modest. Many commercial corrosion inhibitors and coatings can reduce corrrosion rates by a factor of 10 or more.
Also, there are cultural issues that might hamper the adoption of such "green" corrosion inhibitors. If I suggested to management that we begin using fruit juice as a corrosion inhibitor for aluminum, I doubt it would be taken seriously.
Lou, you're right--date palms are grown very widely. OTOH, depending on how many it takes to produce the extract, that could interfere with production of food crops and medicine crops.
Beth, it's not just a difference in porosity between tooth enamel and aluminum, it's the fact that they are entirely different physical and chemical structures. What happens between aluminum and the fruit juice extract is an electrostatic interaction, which is very different from what occurs between that extract and enamel.
Beth, that is an interesting development. Using non-toxic organics will probably result in production processes that are less toxic as well. Then the issue is can we grow enough of the organic compound to keep up. I doubt that is an issue with dates.
@ Ann: Do you have the name of the tree (common or scientific)? A friend just came back from Morocco and mentioned a tree that's being promoted heavily for export products. I'm curious to see if it's the same tree.
Given what sugars and fruit juice can do to the enamel on one's teeth, this result is a surprise to me. I suppose teeth are far more porous than aluminum, which could explain some of the differences. Nevertheless, using juice extracts as a way to prevent corrosion as opposed to toxic materials--you can't argue with that kind of green development.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 4
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
