Darwine, you bring up an interesting concept thatI had not considered previously. BUT it does make sense. Clearly, havng an adequate amount of space to work in is a way to enable greater productivity. But space alone may not be nessesary as the only way. Having the needed resources helps a lot also.
Im also having hard time to clean my office desks. Rearranging all my stuff is not easy. It'll take time since I was loaded with a lot of tasks. Simple thing I'm doing to clean it up: I separate the unecessary items to avoid distraction.
As DeMarco and Lister showed in Peopleware http://amzn.to/12NzfR7 productivity is directly proportional to one's office floor space and directly proportional to one's desktop area. So why do we still find ourselves engineering the world in such (clearly) cramped quarters?
There is a HUGE difference between neat and organized, and at the same time, they are not mutually exclusive. BUt some take neatness to a stupid extreme. When I worked at Methode Electronics Division they got a new lab manager whose lack ot technical skills was more than made up for by his penchant for neatness. The extreme was rearranging the shelves where the different engineers stored their project materials. Insteaqd of each engineer having a specific shelf for their materials, he moved things so that each shelf had a similar looking arrangement of boxes and packages, with no consideration of what belonged to whom. So folks would need to go through all of the shelves to find their parts. That was neatness taken to a stupid level.
I am a bit let down at only scoring # 2 in this second leg of this "competition" but I am chuffed in getting 50% of the picture coverage even though the last pic was not really representative of the matter at hand – The photos were taken to do a 360° panorama of the room and dates to somewhere in the 200x's – I should possibly have taken a new set of pics as technology has changed the general theme of the area somewhat.
My apologies to contradict some of the Clean Desk proponents here but, I can assure you that I can, 99.9 % of the time, lay my hand on any tool, device, screw, component, whatever might be in my study.
The subject of this thread restricted the entries to "desks" else I could have taken you though the door at the end of my study to my garage that probably contains 2 x as much stuff as does my study but more boxed and stored away than here in my area of activity.
As far as documents go, once a year, I capture everything required to submit my Tax Returns from the year's (Pandora's)(photocopy)) box and then file it way marked clearly with that tax year's dates.
I can find the sales slip of the new kettle I bought 18 months ago (as well as the box it was packed in) and return it for its 24 month warrantee as I can for the Pioneer Quadrophonic sound system I bought 40 years ago and still works in the lounge ( as well as it's boxes in the roof of the garage!)
And then I probably do not need to remind anyone of the layout of the human brain? Also a "mess" and, to date, man has been able to discover what certain area do but for the rest, they have no idea what gives. But I can recover images and thoughts for most of my 65 years with such speed and clarity "it boggles the mind!"
I remember when I was a machinist I kept my toolbox perfect as well as the shop itself. Every tool in it's place. I worked 1st shift and I would almost always spend 20-30 minutes every morning cleaning up what 2nd and 3rd shift had done. I just couldn't work in the mess. It was pretty bad.
That's exactly what I want to avoid: wasting time looking for "tools" needed to do the job--including pieces of paper if it's in the office--instead of doing the fun part. My kitchen is highly organized for that reason. I love to cook, but I hate to not find a tool in it's place. Now if only I could keep my office as organized as my kitchen...
I must spend 25-30% of the time I am working on something looking for where I put a particular tool (usually the tape measure) or pencil. I actually buy 2 or 3 of just about every tool so when I go back to a project, the tools are nearby. Otherwise I would have to go looking all over the house, garage and shed to find something I need.
Chuck, if it's only 10% of your time, then I say why bother cleaning up? When I said gridlock I mean more like 30%-plus; that amount can definitely affect productivity.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
