Article states: "Traditionally $10,000 for each independently actuated degree of freedom, The Sandia Hand, costs about $800 per degree and has 12 degrees of freedom". Guessing that means each of four fingers is two degrees (one per joint), plus wrist rotate, plus wrist bend, plus elbow and plus shoulder equals twelve. (My guess). This entire robotic arm at $9600, is affordable for such a sophisticated piece of technology. Compare that to the prior (traditional) estimate at $120,000 for what we are seeing and the benefits become quite clear. TJ took the words right out of my mouth: first I was impressed, then I was amazed. It dropped a AA battery into a flashlight. THAT's dexterity sufficient to diffuse a bomb.
I wouldn't get too caught up in the magnetic attachment. That really seems to be a separate feature for specific applications where 1) force limitation is vital and 2) dropping a finger isn't going to cause other issues.
In addition to the other suggestions posted, I could see a few generations down the pike focusing on scalability. Same concept, for example, for microsurgery except 1/10 the size and the operator is using a zoomed-in video feedback.
Just wish the video would have shown more of the glove control mentioned in the article. There was just a brief glance at the end. It seems that there is an added layer of complexity for the user, though, since there are only 3 fingers.
Nadine, I agree about the weight issue, especially since the fingers are attached magnetically. The fingers' ability to fall off instead of break means--that they can fall off. OTOH, how much weight they will be dealing with when performing delicate IED disarming tasks may be a moot point. Their design seems to be aimed more at delicately picking up small objects, like the key, than at dealing with weight.
Scott, I've also noticed how much robotics funding is coming from DARPA and various branches of the US military. A bit unnerving, perhaps, but still intriguing to see what they're coming up with.
From what I can see in the video, weight is an issue for this hand. The receiver of the princess phone was picked up but not the base. Even the case, which seemed heavy, was almost dragged by the handle. The ability to carry heavier weight may be a key difference for price.
Magnetic attachments for the fingers are a great example of design thinking. I wonder how they'll solve the problem of the fingers flipping back (very noticeable in the video).
This is a pretty neat development. What a clever approach to a robotic hand design. Interesting that this came out of Darpa - it seems that all the financing for robotic development is coming out of the government these days.
Holy cow, this is impressive! From the detachable fingers, to the amazing dexterity, this is a great development. I was impressed right up to the key pick-up, after that I was amazed.
The key pickup does hightlight one aspect that will require some more effort - feedback. Trying to pick up something without having the force feedback creates a sense of separation and isolation. Getting pressure feedback from the fingers to the operator's glove interface is the next big challenge.
mrdon, I think those are interesting apps you mention. Of course, the materials would have to be designed specifically for use in those specialized environments: with hazardous chemicals and for the vacuum of space. Interestingly, the GM Robo-Glove my colleague Chuck Murray wrote about earlier this year http://www.designnews.com/document.asp?doc_id=240915 was derived from NASA's humanoid space robot Robonaut 2, which is up in the space station and one of whose tasks will be conducting EVA (extra-vehicular activity) dangerous operations.
Ann, Great article! I see variety of applications for which the Sandia Hand can be used in addition to bomb detonation. One application I see this hand being quite useful is in working with hazardous chemicals. A scientist will not need the protective gear when handling hazardous chemicals, the Sandia Hand could be used. The scientist can work remotely and manipulate the chemicals using the gloves to control the handling process. Also, the International Space station can make outside repairs with these flexible hands as well.
Lou, it looks to me like the key means of driving down costs were making an effort to do so. Since these are aimed at the military, costs had to be low, and there was a concerted effort to reach that goal. As we state in the article, this was the effort in partnership with the consulting firm LUNAR to "select motors, research skin-simulating materials, perform cost-of-goods and cost reduction analyses, and research design-for-manufacturing considerations." What I'm curious about is the opposite: if this can be done by a concerted effort, why the heck have they been so expensive before? My guess is that earlier robotic hands were developed either for fundamental research, or for very high-end low-volume uses.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
