I think the major OEM tire supplier companies are hard at work developing tires with lower rolling resistance. The auto manufacturers may then make the best tire choice for equipping their cars.
When I recently purchased new tires for my weekend performance car, I was mainly concerned with the best dry weather traction, chose a Summer-only ZR-rated tire that provides tremendous grip. I was not concerned with wear, and the tire does have a higher rolling resistance than other all-round tires.
When I need new tires for my daily-driver economy car, low rolling resistance, overall performance and high wear will be the prime considerations. Perhaps I will just get the same tires as the car came with new from the factory.
The way it looks right now, EVs may not help much to reach CAFE standards. Yet, while battery development can't match the rapid developments we're accustomed to in electronics, a couple of good breakthroughs could change the landscape dramatically. It's good car makers are still working at it.
TJ, that's a good point. I wonder if it's because tire technology such as shown in Chuck's slideshow is bleeding-edge? Just guessing that it is. If so, it may be unknown to the survey respondents, who are, presumably, working inside automakers.
I think the focus on combustion engines and hope for breakthroughs has to do with the fact that the entire design and manufacturing infrastructure, systems and practices of a non-alternative energy car is optimized for the combustion engine. Changing all that to a completely different focus is very difficult and painful, perhaps at least as much as changing all that to deal with plastics and composites instead of, or even in addition to, metals.
Rob, the size of the battery pie slice didn't surprise me, based on the intense coverage Chuck has given to the topic, and the articles I've written on EV and hybrid battery materials. They're still too heavy and not efficient enough, although these days at least they don't make the EV weigh two tons.
I must agree about aerodynamics not getting a bigger share of interest. In 1984 I and a partner rode a streamlined motorcycle from San Diego to Daytona Speedway during the motorcycle GP with a sealed 12 gallon tank and filled up with 11.38 gallons at the 76 station in the pits at Daytona speedway. We averaged 215 mpg for the trip. No batteries, nothing really radical with the motor, just good aerodynamics and careful driving at 55-60 mph the entire trip.
I wish that more work would be done on just getting the shapes better for more efficient running at highway speeds. The EV1 electric car would have great mileage without the battery weight and just a good efficient IC motor, the drag numbers on that car were very good and most of the hybrids would do very well with the drivetrain replaced with today's efficient IC motors.
Glad to see some interest scared up by the mandate, altho I do not enjoy mandated performance.
TJ and Ann, it is interesting that aerodynamics is not more prominently selected. The big problem we have is the rise of the SUV. Some of you may remember the oil shocks of the 1970s. After that, a prominent feature of automobile advertising was the coefficient of drag. With the rise of the SUV, starting with the Ford Explorer, that went by the wayside. We now have crossovers. These are SUVs on a car chasis. They still have basically the same aerodynamics, which is bad. Better aerodynamics, along with weight savings, would go a long way toward meeting the standards. And those do not required major scientific breakthroughs as with batteries.
I don't find it that hard to believe. Combustion engines will continue to be the biggest seller so it makes sense that that is where they are putting forth much of the effort.
Ann, I agree the EcoBoost engine is a breakthrough that would help move the indsutry to meet CAFE standards. I was a little surprised to see the battery research taking such a large portion of the pie chart. No matter how efficient the EV and hybrids get, they won't help car makers reach CAFE standards if sales remain such a small portion of overall vehicles sold.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
