Naperlou, these remind me of WWII PT boats, which were made out of plywood, and were fast. (Range and torpedos probably the biggest difference.
Some of these armament/drones etc. replies ignore both political reality, and reality in general. 'Pirates' look like fishermen. (With nicer, bigger outboard motors?) Shoot first, and ask questions later? How macho!
When you find out they are pirates, it may well be because they have sidled up to a boat, or even already have boarded one. Gonna spray that big tanker with a fifty? Kiss the crew goodby? I don't think so.
Do the pirates buy fifties for their boats? Heck, do they buy one of these boats?
Five years after these are deployed, pirates have quit, and these are no longer patroling. At which point the pirates start right up again?
I surely don't know how this will play out, but I thirst for more info about this boat and how it would be used. Sounds like it might pay for a lot of merchant mercenaries, riding right on the target ships. But that's probably a whole new can of worms.
Ken E. - I imagine that the firepower would consist of a series of options based on the actual missions of the customers. In fact, these might be aftermarket from other suppliers.
Armorment, though, is an interesting question. What happens when somebody shoots back? I have not heard any comparisons between these lighter materials and their ability to remain intact.
Even A single .50 BMG would get the point across. They wouldn't have to arrest anyone just defend the escorted ships. One of the main ships could serve as Command and Control and the small vessels would respond with intercepts and machine gun bursts. If you've ever been on the receiving end of .50 caliber fire you know how intimidating it is. Even a single hit on the types of boats the pirates use would be devastating.
My recommendation for fighting the pirates in that part of the world would be to use well armed drones and simply blast them out of the water. After a few hundred pirate vessels are sunk, possibly there would be some reduction in maritime piracy in that area. It is quite likely that the payback on the investment in drones would come within just a few weeks.
The fact is that it is hard to scare the pilot of a drone, since they are far away.
Much ado about extended range, but nothing about munitions or armor. Are they going to drive pirates away by merely looking badass?! Is this for recon, point of spear, or what? If they arrest 12 pirates, hows that get handled? Is it stealthy? Sold to the highest bidder?
Lou, I looked up the P-51 Mustang and that aircraft sounds like a good analogy to the boats escorting ships I describe. Regarding CNTs, they are showing up everywhere in composites to reinforce them: the resulting materials are called nanocomposites.
Ann, when you mention the longer range of these boats and the fact that this makes them a game changer in the business of escorting ships against an enemy, I am reminded of the P-51 Mustang. Their longer range made them able to escort larger bombers all the way to their targets. It was a technological improvement that made them able to do the job at the time. In the same way these boats incorporate improvements that let them do a job that was not really possible before. The carbon nanotubes are really interesting. I have seen them used in microelectronics where they are literally grown within the chip. It is very impressive. In that case they are able to tale larger electrical loads than standard conductors. In this case it is strength and light weight that is the attribute.
Fascinating article, Ann. I guess it shouldn't be surprising to find composites are working their way into boats. I also find it interesting that that goal is to prevent piracy rather than chasing the bad guys afterwards.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
