Very cool. Should be a staple for airport security, patrolling parking lots and other public venues if it really is effective. That would definitely ensure a higher level of safety.
I was impressed at what the digital CMOS sensor-based camera made by the parent company can do: it's got a 360-degree panoramic view. But that's not used in the Ferret--that one is a CCD sensor-based camera with (apparently) a 90-degree angle, which is still pretty wide.
It looks a lot like an iRobot in terms of its aesthetic design. Not only are these robots perfect for scouting under cars and through parking lots, but what about malls, schools, or other public venues where there are long stretches of terrain to patrol.
Chuck, iRobot makes the Roomba for vacuuming, with a very similar shape, hence my reference. There are various small robots that do surveillance, but I don't recall any of them shaped like the Roomba or the Ferret. Let us know if you find one.
Hi Ann, In addition to vehicle security surveillance, I see this robot being useful for mobile auto mechanics who need to check the underbody of an automobile for leaks, or holes caused by rust in mufflers. What a great tool as well as article! Speaking of iRobot, here's the link to their Creater robot kit for any interested in tinkering with mobile robots. http://store.irobot.com/family/index.jsp?categoryId=2591511&s=A-ProductAge
mrdon, that sounds like a really good app for this robot. But I wonder how much it costs. Some quick Googling didn't turn up any prices for the Ferret, but the much more capable 360-degree Panoscan cameras made by General Robotics' parent company go for about $40,000 each.
$40,000! Wow, Ann. That's a lot if it's like the Ferret. The Ferret looks fairly simple, technolgy wise. Can't imagine the parts that go into it cost more than a few hundred dollars.
Rob, these are not consumer prices, since the cameras are much more capable than consumer products and they are designed for organizations needing computer vision, not snapshots. This--cost and capabilities--is especially true of the image sensors they contain. Also, consumers have gotten used to extremely cheap camera prices due to the price declines in CMOS image sensors. I'm pretty sure the Ferret costs less than the Panoscan since it is less capable. OTOH, it's digital, which means it uses CMOS image sensors, and the Ferret is CCD-based. Comparable CCD sensors usually cost more than CMOS sensors, but the two cameras must have very different sensor specs if one can do 360 and the other can (apparently) do 90 degrees.
That explains a lot, Ann. Are these systems also programmed to recognize unusual objects as they make their scans? Do you know if devices like the Ferret feed their scans back to a centralized center where they can be viewed by experts with more knowledge than those in the field?
The article suggested that the camera was removeable. Is that only for replacment or are there other options available, maybe like a chemical sniffer package with less advanced camera?
@Rob, that would be a good idea to pair the unit up with some high end matching systems. I could see in the future having a database of common vehicle undersides and then alert if somesomething doesn't match.
Good point, Jack, on both the chemical sniffer package as well as a database of car underbellies. Seems that would be within reach technically. That could offer a quick detection of something different in the picture.
Jack, the article says the camera is movable, not removable. I think combining it with various object recognition/analysis software packages, as Rob suggests, might be an interesting idea, or chemical sniffers, as you mention. But the existing robot is designed primarily for on-the-spot human eyeball/brain inspection.
As we said in the article, the video is viewed by the operator using special glasses or a monitor. Alternately, it can be recorded or streamed to a remote location. Object recognition and analysis would most likely be a facet of vision analysis software, but I don't recall any being mentioned.
Great idea! The new airport skirt cam! Fun for parties too. They're expected to be on the wish list of every college dorm security guard. Get your orders in early.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
