Jack, the article says the camera is movable, not removable. I think combining it with various object recognition/analysis software packages, as Rob suggests, might be an interesting idea, or chemical sniffers, as you mention. But the existing robot is designed primarily for on-the-spot human eyeball/brain inspection.
As we said in the article, the video is viewed by the operator using special glasses or a monitor. Alternately, it can be recorded or streamed to a remote location. Object recognition and analysis would most likely be a facet of vision analysis software, but I don't recall any being mentioned.
Good point, Jack, on both the chemical sniffer package as well as a database of car underbellies. Seems that would be within reach technically. That could offer a quick detection of something different in the picture.
The article suggested that the camera was removeable. Is that only for replacment or are there other options available, maybe like a chemical sniffer package with less advanced camera?
@Rob, that would be a good idea to pair the unit up with some high end matching systems. I could see in the future having a database of common vehicle undersides and then alert if somesomething doesn't match.
That explains a lot, Ann. Are these systems also programmed to recognize unusual objects as they make their scans? Do you know if devices like the Ferret feed their scans back to a centralized center where they can be viewed by experts with more knowledge than those in the field?
Rob, these are not consumer prices, since the cameras are much more capable than consumer products and they are designed for organizations needing computer vision, not snapshots. This--cost and capabilities--is especially true of the image sensors they contain. Also, consumers have gotten used to extremely cheap camera prices due to the price declines in CMOS image sensors. I'm pretty sure the Ferret costs less than the Panoscan since it is less capable. OTOH, it's digital, which means it uses CMOS image sensors, and the Ferret is CCD-based. Comparable CCD sensors usually cost more than CMOS sensors, but the two cameras must have very different sensor specs if one can do 360 and the other can (apparently) do 90 degrees.
$40,000! Wow, Ann. That's a lot if it's like the Ferret. The Ferret looks fairly simple, technolgy wise. Can't imagine the parts that go into it cost more than a few hundred dollars.
mrdon, that sounds like a really good app for this robot. But I wonder how much it costs. Some quick Googling didn't turn up any prices for the Ferret, but the much more capable 360-degree Panoscan cameras made by General Robotics' parent company go for about $40,000 each.
Hi Ann, In addition to vehicle security surveillance, I see this robot being useful for mobile auto mechanics who need to check the underbody of an automobile for leaks, or holes caused by rust in mufflers. What a great tool as well as article! Speaking of iRobot, here's the link to their Creater robot kit for any interested in tinkering with mobile robots. http://store.irobot.com/family/index.jsp?categoryId=2591511&s=A-ProductAge
Chuck, iRobot makes the Roomba for vacuuming, with a very similar shape, hence my reference. There are various small robots that do surveillance, but I don't recall any of them shaped like the Roomba or the Ferret. Let us know if you find one.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
