I do not care for most of the chores associated with being a home owner, but mowing the grass is a good excuse to get out of the house and lose the blues of the day while pondering the meaning of life. I agree with Warren's early post that this just presents an opening for my wife to find more chores. If someone really wants to create a robot to do really good things for a homeowner, make one that scrapes and then paints the window frames that are in need of both. How about one that cleans my gutters or picks up after the dog? But leave my grass alone. Same with shoveling snow. They are both good exercise and leave me with a feeling of accomplishment. Just goes to show what a mundane life I lead.
Good questions, Chuck. If the robot can dock itself when it needs to be recharged, it could get by with a less aggressive battery. Could be the self-docking system is a recent innovation.
Reading these comments is as interesting as reading the article. I never knew there were so many robo mowers out there. Makes me wonder why I've never seen one patrolling a neighbor's yard!
Thanks for the link, Rob. I had no idea there were so many companies making robo-mowers. It's interesting to see how many are using lithium batteries. As I recall, the Friendly Robotics mower would dock itself and re-charge on its own. So what's the purpose of an expensive lithium battery? Is it for bigger lawns?
RW, the rain sensor and the automatic re-charging sound like great additional features. It will be interesting to see if this market takes off. With Honda's high price tag, it sounds like there is plenty of room for competition.
I haven't heard whether Friendly Robotics is still selling Robo-Mowers, Rob. I see they still have a web site, but they seem to have disappeared. There's an old saying that when it comes to innovation, it's better to be second, rather than first. That saying may apply here.
Very interesting indeed. But the cost is a big deal also. It takes as long to unroll the cord of my electric lawnmower as it doesto mow the lawn. So I do wonder about the value provided to me by an automated mowwer. For a 5 acre lawn it could make sense, but for a really small lawn even a powered mower is a stretch. Every once in a while though, it seems that it might be handy to have some robot do the mowing, mostly when the weather is really hot.
Yes when it finishes it follows the perimeter wire which runs under its dock. When it docks it hits two paddles which recharge the batteries.
It is fully programmable to go out and cut whenever you like. Any day any time. Mine goes out Monday, wednesday, friday at 2am by schedule, and then I manualy let it out once over the weekend as well during the day just to watch it run as its very ammusing lol.
It doesn't do well in the rain if you have hills as the tires slip. It has a rain sensor though that you can enable or disable. I enable the sensor since I have hills which means if it rains it doesnt go out that day. If you had a flat yard it would do just fine. The clippings it generates are so tiny that you dont end up clogging the mower up like an ordinary mower would after rain.
Good information, RW. Does it park itself when it has complete its rounds. Can you program it to awake every few days (say if you're on vacation)? How does it do in the rain (which could happen while you're sleeping).
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
